This is an archive of CompuServe forum messages from 1985 to 1995, as saved in transcripts by John Foust.
Search Results (248 messages)
Hi Trent, I have one of my customers having the exact same problem with is video toaster… I first thought it was coming from the video source but as I see it isn't. All the other Video Toaster we sold work fine except for this one… we are going to…
Profonts
Message #25253
Hi, could you give me more details about your Profonts packages? Are they standart amiga bitmaps fonts!? How are they differents from other Bitmap fonts packagesg Pat, from MicroVision, Quebec city, Canada – via Whap!
Can you talk with HST 14400 bps v42bis with you 9600bps Supramodem!?
ATONCE & SCSI controler
Message #27841
Is there anybody using ATONCE in a A2000 with a HD controler!??? I tried both the A2091 and the NEXUS controler and none seemed to work! Any comments or experiences to share!? Thanks! Pat. – via Whap!
Adding sound to Anims.
Message #6445
Hi, I would like to add iff sound effects to my Dpaint III anims… what program should I use!? **** Pat ****
ADPro & 3MB ram
Message #21630
I, I am calling as e representative of MicroVision, an Amiga Dealer in Quebec city, Canada… one of my customers who have 3MB of RAM is not able to load CDTV 24bits IFF pictures with you new ADPro… Is that normal!? Thanks. **** Pat ****
Ppage 2.0 Bugs
Message #21582
I have two problems with Ppage 2.0: First, on my A3000 I can't print images correctly on the HP Paintjet (the top half inch of my pictures comes up gray. Second, on a my friend's A2000 it stop working since january first 1991!?? it works fine if we change the…
HOW much more does it cost when using the 9600 line with Compuserve!? **** Pat ****
Anything new other than the manuals in that update!? **** Pat ****
Can we have the address of Blue Ribbon SoundWorks!? **** Pat ****
#7307-
Trumpcard Pro
Message #7659
The trump card pro for the 500 works just fine… its probably the fastest controler after the GVP Series II… I like the trumpcard Pro because you can use the cards in a A2000 later if you want. Speed are up to 600k/sec with Quantum/Conners drives. **** Pat ****
AMAX-II+ availability?
Message #15020
The gave me a price in the range of $400-500 US for AMAXII Plus. But nothing official yet.
DL2000 Sendfax Problem
Message #15019
I have the save Datalink-SendFax-A3000 problem… let me know if you find a solution!!
How fast is you TrumpcardPRO-Quantum 210MB combination? Pat. **** Pat ****
#4493-
Syquest on A3000
Message #5174
As of our experience, the Syquest drive does NOT work fine on the A3000 or A2091… it does format but freeze the system as soon as you transfer files to it. Pat. **** Pat ****
HAM-E
Message #19825
Have you started shipping the HAM-E yet? **** Pat ****
Broadcast Titler II
Message #2219
Hi everybody, we just received today BROADCAST TITLER II and let me tell you that this software is software is wimply incredible!!!! It is by far the **BEST** Amiga Titling program ever done!!! There are so many new features and improvement in that software that I can easyly tell that…
NOCLICK
Message #1578
Hi, What would be the best NOCLICK program to use with a 3000 under KS/WB 1.3???? Thanks! Pat. **** Pat ****
#A3000 Compatibility
Message #115067
Didn't someone here said that Digipaint 3 does not work ont the A3000??? I got my A3000 today and Digipaint 3 works fine! (Even with only 250k of FAST RAM available on the system…) I have also received my v1.4 upgrade of Diskmaster which works perfectly well on my A3000…
That's true, Developpers are getting beta versions of the 68040 now but won't be able to have the production run before fall… and maybe not before chrismast! And also add to that the fact the the first versions of those 68040 accelerators will probably have a couple of bugs in…
Those guys who advertised an 68040 accelerator in thhe July Amigaworld have even not finished the prototype board yet….! they don't even know if they will be using autoconfig memory (
HardFrame & Setcpu
Message #114230
I would like to remap the HardFrame drivers in 32bit ram with Setcpu and the GVP A3001 but they (GVP) only supply theirs (IMPACT) and Commodore (A2091) rom file.. (of course!) 🙂 Does anybody know how to do that?? Pat **** Pat ****
Yes I need more details… I have a 1M agnus and a waiting hungry A500 in front of me… I already instaled a 1Magnus in a 4.5 A2000 but I don't have the details for the A500…! **** Pat ****
The Xetec A500 SCSI interface is great and fast… even faster than GVP controlers on the A2000!! I tried a Syquest drive on the Xetec and it wasn't able to access it but I haven't made to many tries. **** Pat ****
#1MAgnus
Message #104089
What are the steps needed to install a 1MAgnus into an Amiga 500? **** Pat ****
A500 Fat Agnus
Message #100178
What are the jumpers/traces to cut when installing a 1M Fat Agnus in an A500?? **** Pat ****
HardFrame RDPREP v1.56
Message #99016
I would need the version 1.56 of the MicroBotics RDPREP program which is available on BIX in the MicroBotic file section but I don't have access to BIX! Could someone get that file and upload it here… it would be greatly appreciated! I need that file if I want to…
Thanks for the infos!
What are the paint programs that can accept RGB files?
Will the Amiga BridgeBoard be fast enough to run TARGA softwares? Are there other boards comparable to the VD1 board? Pat.
#Fractals
Message #31320
I am looking for the program HAMMandel… Could some one help me? Also I am lookind for a fractal program that plots the function z^3 – 1 = 0. Thanks.
#Targa boards
Message #95829
Hi, I need information on Targa boards…! – What is it exactly for? – Is it available for the Amiga? – Is is for Animation? Thanks!
#MCC PAscal
Message #31054
What is the latest revision of MCCPascal? Pat.
How much cost the Konica drive itself? Speed?
I just got version 1.3G from GVP and it works perfectly fine now! thanks. Pat.
It does not work with the new 2Megs IMPACT Hardcard… and I am not able to restore the backups I make in FILE MODE! It restores only 40-60% of the files from the tape. It's like if it would not be able to see them. I have version 1.29 of…
#whap! Ghosted options
Message #93570
There are many options that are ghosted in messages menus of whap! (registrated version 1.8). Those options are: Save Unformated, Save Orivate, Email, Email-Receipt and Originate! Is that normal? Thanks, Pat.
MCC Pascal
Message #30418
I would like to know what is the latest revision the the MCC Pascal compiler. Is it a good Pascal Compiler? Thanks!
#29903-
Graphics on Pro Page!
Message #30417
Try holding down the ALT key while resizing your graphics in Ppage…! PAt.
#GVP 150MB Tape Backup
Message #93568
Did someone used the 150Mb tape backup kit from GVP? I have one here and I would need help! Pat.
Ppage & IFF inport
Message #30260
Is it possible to import IFF pictures (bitmap import) with the brckground free?? I want to put some titles I make with DpaintIII and the KARAfonts on the top of my Professional Page page but I can not see throught the brush I just imported! This is a KARAfont Title…
#Xetec & Lharc problem
Message #92986
I have a problem with a Xetec HD kit and Lharc on an Amiga 500: If I extract a .lzh file while I'm downloading I get some errors in my download with either Jrcomm 0.94 or BaudBandit! It's like if the priority of the Xetec system was too high! I…
I called Gold Disk on Friday and the CGfonts disk is not available yet. PAt.
14" sheets with Ppage.
Message #14926
On do we set de HP Deskjet Printer to print 14" sheets with Ppage 1.31?? Pat.
Landscape
Message #14925
Is it Possible to print Landscape with Ppage v1.31 on a HP Deskjet printer? Pat.
#HP_Deskjet Plus
Message #88472
Hi, I would need information on the new HP Deskjet Plus… A) Does it a special driver or will the Commodore Deskjet driver be enough? B) Is it possible to print on Legal (14") sheets with Ppage 1.31 and the printer? C) Is it possible to print Landscape with PPage…
Your products will be very appreciated by myself… if the Interface is good I will buy them! Il would like to see an file save compatible with Prodraw for your graphic program. It would be usefull to have vectored graphics for DTP!
#2400 bauds MNP Level
Message #69941
Hi, I have a MNP modem 2400. What MNP level (1-5) shoul I use on Compuserve??? Alos is there any 9600 lines on Compuserve??? I am calling the Montreal node. Pat.
Lattice 5.04
Message #69939
Is Lattice 5.04 out??? What's new in it? Pat.
Paintjet-Amax
Message #69938
Hi I have a Paintjet and I would like to know if it is possible to print on it with A-Max!? Thanks. Pat.
Page 4 of 5