CompuServe Thread

multisync monitor wanted

14 messages in this thread
#45823From: Andrew J. RichardsonJan 10, 1992 2:11 PM
howdy, if anyone's hanging onto a multisync monitor that they aren't using, or if they are considering buying a new one, my diamondscan just went belly up. hence, i'm in the market for a used multisync to replace it. send me some email if you'd like to sell. i'm willing to pay in the $300-$400 range. andrew 76667,3312 —Andrew
#45970From: Chris ScheersJan 12, 1992 12:24 PM
I just found an ad for Princeton Graphics Ultra 14s. This multisync monitor will handle from 15KHz to 31KHz, so it works well with Amigas. I have been very happy with mine, with two exceptions: 1) I built my own cable and had a lot of trouble getting it right. I eventually found that I needed to add a resistor to the VSYNC line. I would recommend buying a cable with a return policy. 2) The image tends to shift when chaning sync rates. The adjustment controls are in the back, which makes this a bother. The picture itself is superb. I do not have a flicker fixer, but I have been using it with the ECS Denise and productivity mode with AMAX and WB1.3. The address in the ad is: Dexis Corporation 7000 Shady Oak Rd. Eden Prairie, MN 55344 (512) 944-7670
#45971From: Chris ScheersJan 12, 1992 12:25 PM
OOPS! I forgot to state it, but they are asking $399. Chris
#46034From: john loweryJan 12, 1992 11:57 PM
Chris, In ref to your posting on the multisync monitor, what kind of line pattern does it have (800X400??) and what is the dot pitch (0.31, etc) JOHN – The Lost Southerner!!
#45983From: Charles FigueiredoJan 12, 1992 3:19 PM
Chris: > I just found an ad for Princeton Graphics Ultra 14s. This multisync > monitor will handle from 15KHz to 31KHz, so it works well with Amigas. I > have been very happy with mine, with two exceptions: What's the dot pitch and bandwidth (max resolution) on this monitor? Regards Charles
#46098From: Chris ScheersJan 13, 1992 10:09 PM
I don't know what the dot pitch is, but the monitor is normally advertised as a 1024×768 monitor. Some of the earlier models seem to be fuzzy at 1024×768 and may really be 800×640 monitors. I don't know how to tell without testing which is which. Chris
#46141From: Betty Clay/SYSOPJan 14, 1992 10:25 AM
Chris, If that is the Princeton Ultragraphics monitor (I think I remember that one being mentioned here) its dot pitch is .28. Betty
#46200From: Chris ScheersJan 14, 1992 10:24 PM
It is the Princeton Graphics Ultra 14. Is that the one that you mean? I know that Princeton did a couple of different monitors with nearly the same name. I have trouble keeping them straight without checking. Thanx – Chris
#46267From: Betty Clay/SYSOPJan 15, 1992 6:32 PM
I think that is the one I had. And the dot pitch was .28. Nice monitor, really. Betty
#46302From: john loweryJan 15, 1992 10:40 PM
Where do we get one or ask for info???? This is in reference to the princton monitors. JOHN – The Lost Southerner!!
#46485From: Betty Clay/SYSOPJan 17, 1992 5:09 PM
John, I don't know where you would get the info. I read ads in the Computer Shopper and looked at the monitors in local computer stores. I know about the dot pitch of the Princeton Ultragraphics because I used one for two or three years. I liked it. Betty
#46528From: john loweryJan 17, 1992 11:51 PM
Betty Where can I get some info on the princton monitor? Is there a phone number of the company or dealer that sells them?? JOHN – The Lost Southerner!!
#46628From: Betty Clay/SYSOPJan 18, 1992 7:34 PM
John, I'm sorry – I don't know. I found mine at CompUSA quite a long while ago. I see them advertised in a number of Computer Shopper ads, but I don't know the phone number or the address of the company. I'm sure it came on some literature with the monitor, but that was a long time ago and I don't see it anywhere here now. Betty
#46087From: Andrew J. RichardsonJan 13, 1992 8:37 PM
chris, thanks for the information…i'll look into it. andrew —Andrew