MONITOR FOR TARGA+
3 messages in this thread
Mitch… I use a Relisys RE-5155 monitor with my Targa adapters. The 5155
has the capabilities to sync to the Targa's 15.75KHz (horizontal) bandwith.
The monitor is fairly reasonably priced (I've seen it – somewhere – around
the $300 mark mailorder, but don't hold me to it. There is one caveat…
You'll have to build your own cable between the monitor/targa adapter,
however, both user manuals have great pinout diagrams and I was easily able
to construct a cable using 9-pin D-Shell connectors from Radio Shack.
The other option, is just run the Targa+ at NTSC composite out directly
into your VCR video in jack and use your television for Targa output. Not a
great solution, but it should work in the interim. (The signal is adequate,
but you'll notice bleed in the red areas off the television).
– Greg
What is the high end resolution on the Relysis Monitor?
640X480 or 800X600 or higher??
Jim… The Relysis RE-5155 will pull 1024×768 SVGA no problem, but is
interlaced at those rezs. I've had that model for a couple of years and
they've probably got a similar model out that will handle non-interlaced
SVGA freqs. Might be worth a call to them (408)945-0587 for some updated
product info… (I should probably do the same). – Greg