CompuServe Thread

#SOTA 386si

9 messages in this thread
#39435From: Gayle Lee FairlessNov 3, 1991 9:53 PM
Steven, What does the SOTA 386si do for you? Since it appears not to have its own memory, I guess it accesses the memory and i/o stuff that you already have. Did you have any special setup software to 'awaken' the board upon bootup? Sincerely, (Mr.) Gayle Lee Fairles 'Perfessor Fearless' PS I'm thinking of one myself, but I'm in no hurry.
#39568From: Steven D. KapplinNov 4, 1991 4:26 PM
Gayle, Well, it provides a 16 Mhz 386 system which uses the BB for I/O and memory. The card has a bus connector to which you may attach a Sota memory card specially for it in which you can install up to 8 Meg of RAM usable as EMS ram on the MSDOS side. I haven't done that so just have the 640K on my 8088 BB. It also has a 16K instruction cache and can also set up a diskcache. In all it's much faster than the stock BB, which becomes noticeable when you use programs like DesqView or PC/Geos. And I suppose also if you use Windows, DR Dos, or New Wave alternative GUIs, but I don't know if Windows or New Wave works on a BB. I do know that Dr Dos works, cause someone here mentioned they had installed it successfully. I have installed Geos successfully and DesqView 2.3. The setup is quite simple. The board requires the removal of the 8088 from the BB and insertion on the Sota board. Then a ribbon cable connects the Sota to the 8088 socket on the BB. If you have an 8087 installed it must be removed. The Sota card has a socket for an 80387 chip. Software involves adding a line to your config.sys file and placing the Sota sys driver in your boot path. The cache controlling software can be run in your autoexec.bat. All in all didn't take long to install and set up.
#39596From: RON TROYNov 4, 1991 6:52 PM
No one that I know of has gotten the 16i memory board fully working. Ron
#39604From: Steven D. KapplinNov 4, 1991 7:39 PM
Oh, that's nice to know. I wasn't planning on getting one, at least not in the near future, but I might have. I'm about out of slots, now, so were I to ever add extended memory I don't know where to put it. Have you had any experience with EMS memory cards for the BB? My old list indicated the Intel Aboveboard and AST Rampages worked, but don't know of any others. I also don't know if both those boards will work with the 8088 BB or only on the AT.
#39651From: RON TROYNov 4, 1991 11:04 PM
I have an antique multipurpose card, so I don't know what else works. But don't count on adding 'extended' ram, though 'expanded' ram is possible. Ron
#39668From: Gayle Lee FairlessNov 5, 1991 12:28 AM
Thanks for your reply! I appreciate it. You may want to check with SOTA or another SOTA user about adding more memory. It is my understanding that you cannot use it with the BB. Do you know if I can use my LIM 4.0 board? I know I have the appropriate software if the hardware is compatible. I'm the one who successfully installed DRDOS 5.0 on the XT BB. You do lose the jlink virtual drives, but I hope to hack the program. I've heard of someone successfully using MSDOS 5.0, too. Sincerely, (Mr.) Gayle Lee Fairless 'Perfessor Fearless' P.S. The memory I'm talking about being unusable is the SOTA addon memory for the SOTA 386si.
#39751From: Steven D. KapplinNov 5, 1991 10:40 PM
Gayle, I'm glad to learn about the problem with the Sota memory add-on. I doubt I will ever add expanded memory since I don't use the BB side all that often. I hear Dr Dos 6.0 is much better than 5.0. Since you've had success with 5.0, I may just give 6.0 a try. I've gotten Geos to work and it's quite nice. Unfortunately, it only multi-tasks its own software. It will run other msdos software, but not in multi-tasking mode. Geos doesn't come with much application software, although I hear the new professional version comes with the stripped down Quattro Pro from Borlund. I don't know about your LIM memory. If it's on an Intel board it may work. I've only heard that Intel and AST cards work. If others work I haven't gotten any feedback on them.
#39822From: Joe WylotNov 6, 1991 7:38 PM
Gayle, Have you tried 4DOS? I have been using it since I installed the XTBB and it runs flawlessly and seems fully compatible with DOS3.3. Has many of the features of ados including command line history, editing etc. Also it takes up less memory and has some useful enhanced commands and on line help. Well worth a look. Joe Wylot (UK) – via Whap!
#39836From: Gayle Lee FairlessNov 6, 1991 9:34 PM
Joe, I know that a version of 4DOS called NDOS comes with the latest version of Norton Utilities. I guess I could download 4DOS as shareware from one of the IBM clone forums. I know I could download it from GEnie so CIS probably has it, too. Sincerely, (Mr.) Gayle Lee Fairless 'Perfessor Fearless'