CompuServe Thread

Caps Lock Flashing

5 messages in this thread
#30858From: Neil WickDec 17, 1992 1:17 AM
Could be a loose Agnes chip. There was a while when the chips were not fitting tightly into the socket. The easy solution that might work if this is the case is to pick your computer up a couple of inches above a hard surface and drop it. I won't be responsible if this damages a computer in any way, but I've seen a technician do it and it worked! Alternatively, you can take the whole thing apart and just make sure all the chips are pushed in tightly, particularly the Agnes, if you know which one it is. Before doing any of this, I'd suggest RHS's solution (turn the power off and wait awhile), becasue I've found that can work too. Neil
#30947From: <David L. Gold>Dec 22, 1992 7:37 PM
Strangely enough, I too whacked the thing out of deparation, and it worked! Nowadays I've discovered that a few firm pushes on the right side of the keyboard and numeric pad can do the trick. Modern technology. Go figure. <Dave>
#31392From: Andrew DavisJan 13, 1993 3:28 PM
I don't know. I'm gonna' try the old trick of pushing firmly on the Agnus Chip. I'm tired of beating my keybaord and I'm afraid my wife is going to report me to Computer Abuse Hotline 😉 Does anyone else have any other suggestions or experience with this VERY annoying problem. Thanks, Andy.
#31437From: <David L. Gold>Jan 17, 1993 11:26 AM
Well, upon further examination, I've discovered that the 68000 chip keeps popping slightly loose. Try giving that chip a good push down and see what happens. I've not had any problems since I taped that baby down good. <Dave>
#31538From: Andrew DavisJan 20, 1993 10:18 AM
Hi Dave, Thanks for the suggestion. I'll give it a try also. If that doesn't work, I was hoping to run some type of diagnostic program/hardware check on the keyboard to decide if what I really need is another keyboard. Ciao, Andy.