This is an archive of CompuServe forum messages from 1985 to 1995, as saved in transcripts by John Foust.
Search Results (19 messages)
Muzz: I *think* I've found a problem…I'd reallocated RAD: larger thatn I believe it can handle…it's been 150 cyl and I tried to increase it, but the upper limit appears to be 180 cyl (just under 2M). But I swear this happened a few weeks ago before I tried *anything*……
RAD handler problem?
Message #40176
I've got what I think is a hardware problem with my 2000, WB 1.3: Intermittently, during startup, I'm unable to format the RAD: device: I get a message sys:system/format failed…can't find handler. Now, I can format a floppy disk OK, I haven't changed anything, and once in awhile, everything works…
RAD handler problem
Message #40175
I've got what I think is a hardware problem with my 2000, WB 1.3: Intermittently, during startup, I'm unable to format the RAD: device: I get a message sys:system/format failed…can't find handler. Now, I can format a floppy disk OK, I haven't changed anything, and once in awhile, everything works…
RAD handler problem??
Message #136640
I've got what I think is a hardware problem with my 2000, WB 1.3: Intermittently, during startup, I'm unable to format the RAD: device: I get a message sys:system/format failed…can't find handler. Now, I can format a floppy disk OK, I haven't changed anything, and once in awhile, everything works…
Mark, Well, for one thing, I finally got a replacement keyboard this week — after a FOUR MONTH WAIT. –damon
wolf, thanks forthe information! — damon
Okidata drivers?
Message #135281
an Amiga driver for it; Okidata says it's HP LaserJet IIp compatible and I'm assuming that means that an Amiga HP driver should work with it. Anyone hear have any experience with either the HP or the Okidata? Thanks!! — Damon Short
Okidata drivers?
Message #135261
an Amiga driver for it; Okidata says it's HP LaserJet IIp compatible and I'm assuming that means that an Amiga HP driver should work with it. Anyone hear have any experience with either the HP or the Okidata? Thanks!! — Damon Short/exit
Okidata prt driver?
Message #135246
an Amiga driver for it; Okidata says it's HP LaserJet IIp compatible and I'm assuming that means that an Amiga HP driver should work with it. Anyone hear have any experience with either the HP or the Okidata? Thanks!! — Damon Short/exit
BB/HD solved!?
Message #123643
To Don Curtis, Andrew Porter and everyone who offered suggestions on my BB/HD problem: >However, when I install the Janus software on the hard disk, none >of this is true! I can run the bridgeboard, but once I enter >"jlink", the 'a' drive on the PC cranks for a moment,…
Andrew, >>>>>>To expand on Don's suggestion: from my experience you seem to have to wait UNTIL the BB boots up BUT BEFORE any calls are made to the Janus system (ie, AMouse, etc) What I did with mine is put a PAUSE in my autoexec.bat BEFORE calling Amouse. In my…
Don: > After exiting your startup-sequence, from a CLI >type the following two lines (or put them in a script file): > PCHard > BindDrivers > (or PCReset…depending on which version of the Janus software >you have ) Thanks for the suggestion. Unfortunately, this doesn't work either. I've even tried…
#Another BB problem
Message #121062
I've had an ongoing problem with my Bridgeboard which I've never been able to get resolved. About a year and a half ago I corresponded with Commodore's online help; after following a couple of suggestions which didn't work, I wasn't able to get any further responses from anyone. So, here…
Thanks Betty, I'll try that… –Damon
Thanks Steve! — Damon
#decompressing zip93.lha
Message #106799
I recently downloaded zip93.lha, but have no information (or clue) as to what to decompress it with. An old pkazip doesn't work, and when using lharc, I get a message that "maybe you need a newer version of lharc". How is one supposed to know what '.lha' stands for? Couldn't…
brBoard problem
Message #52820
Marion, I tried "wait 20" after binddrivers as you suggested, but it didn't help. Thanks for the suggestion, but do you have any other ideas?
bridgeboard problems
Message #52359
I've had a strange problem with Janus 2.0 and my 2000 hard-drive. This involves the Jlink procedures. When I boot up the PC and try to link to the Amiga side, everything stops on the PC. That is, there's no response to "jlink", and the PC has to be rebooted.…
bridgeboard
Message #52259
I've had a strange problem with Janus 2.0 and my 2000 hard-drive. This involves the Jlink procedures. When I boot up the PC and try to link to the Amiga side, everything stops on the PC. That is, there's no response to "jlink", and the PC has to be rebooted.…