This is an archive of CompuServe forum messages from 1985 to 1995, as saved in transcripts by John Foust.
Search Results (29 messages)
Mark-I hate it when they say that!!!! Randy@avcom
Steve-Y'know, I did try to modify my acad.mnu to see if I could fix it and I couldn't find which "quit" it was on the menu. I thot it was @ "UTIL", I believe , but it didn't work the first time so I filed it for "later"…Show me the…
Steve-The client says that they get this error w/ several different dwgs on this one Wyse and the dwgs run fine on other PC's (!?). they tried a new math co-processor in the Wyse but it still generates the HMATH error….our idea is that it's hardware related but since they…
#various
Message #22268
S/B-Any insights on a "Internal Error: HMATH 1 0.000000E+5110ED7:"on a Wyse 386 w/ an Intel above bd?? And I've gotten "invalid Q/S format" again on ATO w/ a corresponding "error #5 at line 10020; stop in line 20001 of module ac308 at address 2E99:2186" when I try to run ACLS;…
#tech help
Message #22265
Steve-Did you ever get the DXF file that you wanted from Cris at Intel?? Did you or Brad Z. explore my bug report (?) about the "quit" on the tablet menu requiring a redundant pick of "quit" again on the screen menu to get out of the dwg.?? Thanks Randy@avcom
Apollo
Message #22151
JRI replied to an old message of yours about acad/Apollo support and mistakenly mailed it to Jamie Clay 'stead of you. Could you call me (or Brad Bishop)at your convenience next week for the gist? It may show u up here in dealers only or ?? Thanks Randy@avcom 415.326.8686 Avcom…
cadvance/dxf
Message #22150
SM-Our guy at Intel said he would send up a copy of that file for your edification. Thanks for your help. Randy@avcom
hatch pattern
Message #22124
Anybody got a DL available hatch pattern for concrete that I could download as a favor to a customer??? Randy@avcom 415.326.8686 Thanks!
Bug Report??
Message #22123
Brad-any thots on why picking "quit" from the tablet menu area requires you to say "quit" again AND say "yes" at the screen menu?? Didn't it used to just require you to pick "quit" from the tablet and then just pick "yes"in 2.6?? Me and some clients were wondering… Thanks…
#rel 10 template
Message #22050
Jamie – I know I asked this once before, but is there any chance we could get an idea of whats gonna change on the AEC & regular templates so we'd be current when we display the AutoPAD at the show in May?? Even if I had a sketch or…
#Various
Message #22049
Tech-niks… Todays list starts w/ a user who gets "fatal error:smio1" with a certain file and I imagine its the diskette or the file has taken "a hit" but I thought I'd ask. 2nd is a client who wants to chng the plot sizes in her plot menu (a,b,c,d etc)to…
Calcomp 1051 plotter
Message #21826
Have you any info on this older model and how it can be cfg'd for Sun?? Anybody ever use one??It is compatible w/ 906/907/PCI we think, so it might emulate one of Calcomp choices on the cfg menu.Confirm?? And is anyone familiar w/ "Schema" the $500 schematic capture pkg and…
Jason Osgood
Message #21825
Does anyone have this guy's phone # or Jason are you reading these?? I have a client that wants to run your text-edit on a Sun and she has questions for ya. Thanks Randy@avcom (415.326.8686)
Autoscript lisp file
Message #21824
I am sending you the two files that give a segmentation fault , ascr.lsp and ascrcfg.lsp. I also spoke to Lance Hodges from Preco Industries, and he is sending you the ungarbled version of these files. He is the guy who wrote this package called Autoscript. Call me if you…
#Wishlist
Message #21765
Brad–Are there any plans in the future releases of the unix-based acad to move the "set-up.lsp" file from /usr/acad/lisp to /usr/acad/dwgs where it might do some good?? Are we the only dealer that runs acad from /acad/dwgs?? I usually come along to do the training after the install has been…
exploding a block
Message #21685
Don-It turns out I'll be in Chicago in May so I'd like to meet your face perhaps in this jazz club on Rush St. Randy@avcom
exploding a block
Message #21685
Don-It turns out I'll be in Chicago in May so I'd like to meet your face perhaps in this jazz club on Rush St. Randy@avcom
Sun/acad/electrostatic i
Message #21684
J-Have you got any insight into how we might lobby for allowing the use of our AutoPAD w/ the Unix Rel9 on Sun machines? We get the Apad from Kurta and they say we have to talk to Sun to find out the address they devote to the mouse port…
Sun/acad/electrostatic i
Message #21684
J-Have you got any insight into how we might lobby for allowing the use of our AutoPAD w/ the Unix Rel9 on Sun machines? We get the Apad from Kurta and they say we have to talk to Sun to find out the address they devote to the mouse port…
Various Sob stories
Message #21683
Gang-of-four; I have for your consideration today two young shut-ins who seek our help thusly: #1) Poor acad user has a DXF file from a vendor that used cadvance to create it, and when he tries to DXF it in ; he immediately gets "improper linetype name line 608 -invalid…
Various Sob stories
Message #21683
Gang-of-four; I have for your consideration today two young shut-ins who seek our help thusly: #1) Poor acad user has a DXF file from a vendor that used cadvance to create it, and when he tries to DXF it in ; he immediately gets "improper linetype name line 608 -invalid…
Various
Message #21552
Brad-Got a call from person w/ a USI "opto" mouse that used to work w/ v2.6 und now don't work w/ rel9—-He works for a large outfit and doesn't know if he has a DUD disk around and he says ADI choice dint work–any ideas?? And another request for a…
Various
Message #21552
Brad-Got a call from person w/ a USI "opto" mouse that used to work w/ v2.6 und now don't work w/ rel9—-He works for a large outfit and doesn't know if he has a DUD disk around and he says ADI choice dint work–any ideas?? And another request for a…
J-Naaaah,the only stuff we develop is ulcers. So we can't be in the club,huh? Ah well, one less DL to monitor. Thanks. Randy@avcom
#ADI
Message #21249
Gang-Can I get a copy of the ADI developer kit for someone who was told by Adesk to call his local dealer?( Us, thankyouveddymuch…) What do I gadda do ….upload $100 to DLBradZ??? And can I have access to DL16 while we're at it?? And also do I need to…
Bob-One thing I can vouch for is that AutoPCB uses the same Acad menus w/ a couple of additional picks in the layout & schematic capture cycle but I believe they walk you thru the routing part w/ their own menus. It was pretty easy and automagic. randy@avcom
John-We've got all that stuff 'cept the Zenith and it works for us…What doesn't yours do??? We use a Wyse386 but that shoont matter. Randy@avcom
#21200-
15.6 Mhz limit
Message #21221
Corky/Craig-That soap-box is one that we also live on; the idea of service from a conscientious dealer is massively important as the hardware requirements and configurations evolve. We are trying to develop "if this, then this…"charts for all our tech staff (3.5 over stressed workaholics!) for the different hardware configurations…
#21184-
ATO (what else!!)
Message #21220
Jamie-I been using Wyse 386/Mitsubishi6905/VMI1024 (for AutoSOLID!!)and the popular Bizcomp Model4120 "intellimodem" (a matter of opinion at this point….) I will try your latest idea and as always,thank you for your support.