CompuServe Messages

Hello Karl >>Tell me more about the towers… I am attaching our full price list and specifications at the end. >>Also, I need more info on the bigger SCSI drives At the moment I only have the 50mb and 400mb. The 400mb was manufactured for IBM PS2 model 90 originally and are surplus about 1 yr old. They clock at 1.4mb/sec xfer rate using SysInfo on the Amiga 3000 internal SCSI controller, don't have the access time. They sit about 1/4" taller than most 3.5" drives, which is not usually a problem. They are unused and we offer a 30 day warranty on them and check each one on an amiga beforehand. ——————————————————- Price List 03/10/94 (405) 721-4309 1:147/77.0 (sysop) compuserve 76470,1332 jonest@hfsi.com The Tower As described in spec sheet, with two bays equipped for removable HD cannisters. Includes two cannisters, w/o harddrives, External molded SCSI cable to connect 25 pin external scsi controller on amiga to tower, External terminator, and customizing of tower for either A2000 or A3000/4000. The Tower $230.00 plus S&H NEW 30 day delivery, $50 nonrefundable downpayment required , COD balance on delivery. *Options*, other items (some items require 15 to 30 dys delivery time, ask). (R)=refurbished NEW=new merchandise. 30 day warranty on new or (R) unless stated. $ASK KBD/MOUSE/JOY ports extension to front panel option (3000/4000 only) $ASK "Glovebox" utility bay added to CPU bay (3000/4000 only). $60. each Modification up to (4) other slots for removable HD cannisters, including the cannister upgraded with led and switch, (w/o HD). $50 each 50mb scsi harddrives, choice of ST157N or Maxtor LX50S -in stock- (add $3. if ordering cannister option for installation in Cannister)NEW $250. each 400mb scsi HD by IBM (R) 0-1 wk delivery (add $3. if ordering cannister option for installation in Cannister) $25. each Scsi cable for 2nd bay, 7 drive connectors, one centronics -in stock- terminator connector, 25 pin connector for controller port. NEW $15. each Flat SCSI ribbon cable, 7 drive connectors with female centronics terminator mountable receptacles at each end. NEW -in stock- $325. each "multisync" Mitsubishi DiamondScan 14" monitor, ideal for Amigas. Supports AGA with 15hz-90hz scan rates, ports for RGB, CGA, and Composite connection to any computer. NEW !!VERY LIMITED QTYS!! -in stock- $125. each Toshiba 3301B CDrom drive (R). !!VERY LIMITED QTYS!! 0-2wk deliv. $150. each 2mb chipram upgrade boards incl memory and 2mb agnes. NEW 15-30 day delivery- ———————————————— ***NEW*** Amiga Tower SPECIFICATIONS: Steel Construction, adjustable feet SCSI bays (6) Sperate 230W powersupply ON/Off switch on front turns computer off with tower Built in SCSI cableing and power cabling for all bays Extra 7th scsi connector in bottom of tower for FH drive Spare enclosed bay can hold up to (5) 3.5" HD's on 2nd SCSI controller 2 fans in tower for extra cooling cutouts on rear to accept RS232 ports all bays standard 6"X1 3/4" size (same as big bay in A2000) equipped to accept "slides" on side of HD's, CDroms, Tapedrives etc for easy install. (2) bays come equipped with special removable trays (cannisters) which accept most 3 1/2" drives. These snap in/out with a pull of the handle for instant swapping of HD's or maintenance. Each cannister modified with indicator led and power-off switch. Installation of A2000/3000/4000 couldn't be simpler: nothing is romoved from your cabinet. Entire computer sits in it's own bay vertically. Floppys, 5" A2000 bay, connectors on front and rear remain accessable. On the 3000/4000 a special adaptation brings kbd/mouse ports to front of tower with extensions. A2000 tower has "quick disconnect" covers for rapid access to internal cabling etc., 3000/4000 tower can be ordered with this. Size of A2000 tower is 13 3/4" wide x 22" high x 17" deep, can be floor or table mounted. A3000/4000 tower is 13"x22"x17" ————————————————— Oklahoma City, OK USA jonest@hfsi.com