CompuServe Messages

Roy, You don't need a shorter internal or external cable. You just need to put a terminated drive at the end of each cable. Just route the internal cable so the last drive on it has the terminators, not the drive in the middle as it appears you have now. On the line to the external box, make sure it's a SCSI cable, not just a serial type cable. The 25 pin connectors don't carry all the grounds, so the cable should have shielded wires with the shields connected to the common ground in the connectors. Yes, you could put a terminator plug on the external port of the external box…IF you remove the terminator plugs from the drive inside the box. Don