Summa
Kevin,
I'm running a series of 50 & 66 MHZ EISA systems AMI/MICRONICS/MYLEX/
EVEREX/ & HAUPAUGE. The machines are networked via Netware 3.11 250
node. The DGPSUMI.EXP can use polling or interrupts. I tend to use
the
polling option. The fact that the serial ports are built into the
motherboard should not have any effect on the Summa. I have several
boards that do have the ports made into the boards and although it
can
help on high speed serial communications, it shouldn't play a role
with a standard digitizer. I also have a Kurta 18×12 and a GTCO 36×48
running through the ADI interface without any problems. The AniPro
problem should be able to be solved the same way. It requires a
slightly different compilation, but should get a similar result.
Always keep in mind that Micronics motherboards are infamous for
having problems. I have at least 5 in a box that all have problems.
As for Studio, the ADI driver from ACAD 12 is the same driver that I
compiled from scratch. I have since brought in the driver from ACAD
12
and it seems to work well too.
Paul