CompuServe Messages

I have the SCSIWorks T130 in a ZEOS 486/66 with a NEC CDR-82 and a Fujitsu M2511A MO drive attached. Under DOS 5.01, all is well and I can get to both drives. Under OS/2, neither is accessed. The error message says that the OS2CDROM.DMD driver was not loaded. The SCSIWorks user's guide says that the problem is that the T13BSCSI.ADD did not load for some reason and that I should run the SCSITEST utility to verify that the hardware and interface are operating correctly. SCSITEST says that everything is working well and it successfully finds both devices. This is an update to the system, which *was* using an Adaptec interface to drive the CD-ROM only. In this configuration, the CD-ROM worked fine. With the addition of the Fujitsu drive, the interface was changed to the Trantor and the device driver for the SCSI interface was changed to the Trantor driver. Since then, neither device has worked. I would appreciate any help on this problem. I have been working on it for three days now. Thanks, Linda Cagle.