Adaptec SCSI Bus Address
05-Jul-93 15:43:48
Sb: #52101-Adaptec SCSI Bus Address
Fm: John Hall 100016,1210
To: Niall Funge 100270,464
I had a similar address conflict and used 230. This is controlled by switches
2/3/4 on the Adaptec board:
2 3 4
0 0 0 330 (default)
1 0 0 334
0 1 0 230
1 1 0 234
0 0 1 130
1 0 1 134
You also need to add a parameter "/p230" (or whatever port you use) to
aspi4dos.sys in your config.sys.
I don't boot from that card, but I cannot see why that should cause a problem.