#Upgrade?
Gracia,
Yes, I have the supra 14400 bis FaxModem. For whap, like i said, delete
the T9600 file and have whap set up things again. The startup string I use
is probably different. It is AT&F2M0W2S0=0. AT&F2 set things back to the
factory settings for the IBM and AMIGA. The M0 turns the modem speeker off
completely. The W2 will show the modem to modem connect rate only on the
front of the modem and the screen. As for the compression, some BBS
(generaly local) will not allow time for the modems to negociate a
compression or error correction. When you find one that is hard to log
onto, issue an AT\N and then dial the number. This will turn off the
attempt at setting up errorcorrection with the modems that won't do it.
As for the other settings, I have an A3000 and have the baud rate to modem
maxed out at 31250 and the buffer maxed out also. If I am not mistaken, it
will accept up to 38400 baud from the computer.
I am from Eastern Alabama – A small town named Pittsview. It is mid state
and 8 miles west of Georgia – just south of Columbus Ga.
Well, I hope this helps. If not, Let me know and I'll try something else.
JOHN – The Lost Southerner!!