downloads
-=>>free memory. WB settings for serial are 8-n-1 at 19200baud. Comm.pr. is
NComm3.0 settings also 8-n-1 on Xmodem protocol. I acess Compuserve at 2400baud
as the com.pr. has no facility for the higher line of 14400baud. This
com.pr.also has no facility to strip-high-bit which was recommended by Sysop
B.C. The choice of protocol Zmodem is not in the library setup.?<=-
Peter,
I highly reccomend JRCOMM for your system. It has a builtin CISB+ protocol
which is what you need for the High Xfer speeds. Its an excellent program that
uses your system rescources very sparingly and it is FREEWARE. Just about any
BBS worth its salt will have it avail in their file section for download.
I'm on a souped up Ami 2000 and I -STILL- choose to use JRCOMM it served me
well on a bare bones 1.3 Amiga 500 and it still does faster xfers than any of
the 'newer' terms that most others use. Especially on Compuserve I pull
1640cps xfers with my 14.4 all the time.
Other than the CISB+ protocol you'll also want to run with a 4 color
WorkBench and no more than an 8 color TERM screen esp if you're running with a
68000 cpu.
One last thing you should check is that you are using RTS/CTS flow control
and NOT XON/XOFF.
Hope this helps
-Ken