CompuServe Messages

help! I have a IBM DX/75 with 8 mgs of ram and I'm running Win95. Everytime I try to render a large wireframe (ie. oldcity.3ds or racecar.3ds) in 3d Studio R3 it does about half and then I get an"Invalid Normal Array" error message and the rendering is halted. I have already tried using a stripped-down boot disk to no evail. Any help would be greatly appreciated. I have enclosed my Autoexec.bat and Config.sys. Matthew Ferraro Autoexec.bat @ECHO OFF PROMPT $p$g PATH C:\WINDOWS;C:\WINDOWS\COMMAND;C:\DOS;C:\BIN;C:\QTW\BIN;C:\NDW SET TEMP=C:\TEMP SET SOUND=C:\SB16 SET BLASTER=A220 I5 D1 H5 P330 T6 SET MIDI=SYNTH:1 MAP:E C:\SB16\DIAGNOSE /S C:\SB16\SB16SET /P /Q rem – By Windows Setup – C:\WINDOWS\COMMAND\MSCDEX /D:SONY_010 rem mode con codepage prepare=((850) C:\WINDOWS\COMMAND\ega.cpi) rem mode con codepage select=850 Config.sys DEVICE=C:\WINDOWS\HIMEM.SYS /v DEVICE=C:\WINDOWS\EMM386.EXE RAM BUFFERS=23,0 FILES=60 dos=UMB LASTDRIVE=` FCBS=4,0 dos=HIGH DEVICEHIGH /L:1,16976 =C:\WINDOWS\SETVER.EXE [common] DEVICEHIGH /L:1,26928 =C:\SB16\DRV\CTSB16.SYS /UNIT=0 /BLASTER=A:220 I:5 D:1 H:5 DEVICEHIGH /L:1,10416 =C:\SB16\DRV\CTMMSYS.SYS rem DEVICE=\DEV\SLCD.SYS /D:SONY_010 /B:340 /M:P /V /C DEVICE=C:\WINDOWS\COMMAND\DRVSPACE.SYS /MOVE rem device=C:\WINDOWS\COMMAND\display.sys con=(ega,,1) rem Country=004,850,C:\WINDOWS\COMMAND\country.sys