Help With SCSI Drives
06-Nov-90 16:22:03
Sb: #5383-Help With SCSI Drives
Fm: Bob Rakosky 75156,336
To: Keith E. Coldiron 73647,3564
Keith,
The 2090A does not support LUNs. If the drives in question are real
SCSI drives, then you can set their addresses to different SCSI ID's via
jumpers on the drives. Set one drive to SCSI ID 0 and the second to SCSI
ID 1. Then, in the Mountlist entries, set the Unit parameter to 3 and 4,
respectively. This should work.
Also, a word of caution. Make sure that the terminator resistors are
removed from the "inside" drive (i.e., the drive that is not at the end of
the SCSI cable).
Hope this helps…
…BobR
White Wolf Productions