CompuServe Messages

Terry, I've done both: To get the system to see the extra CHIP RAM, you've got to move one jumper (Jumper Pad J101) from pins 1-2 to pins 2-3. You've also got to cut the trace between Jumper Pad J500. JP 101 is located directly above the 68000 chip about even with the front edge of CN400 (the point where the power supply plugs into the motherboard). J 500 (simply 2 pads with a trace between them) is located slightly left of the front left corner of the left 8520 CIA chip (U 301 I believe). As to the installation of 2.0 on a 2090 equipped A2000 (or 2500 for that matter)…I did the installation by hand since I'd made quite a few changes from the "standard" setup. For example, I had very small OFS filesystem partitions on my 4 HDs. I ended up re-PREPing the drives and making the entire drive FFS. BTW…on an A2500, you MUST replace the ROMs on the A2620 or A2630 board with Rev 6 or 7 ROMs. Those ROMs should be available at your dealer's now, the list price is $33 for the ROMs. Don