CompuServe Messages

Paul: I got the baby AT power supply at a local PC store (The Byte Shop) here in Ft Laud. What you should do is to remove the plate that covers the squarish hole behind the 5.25" bays (the one with one of the screw holes offset), and take that down to your local PC dealer, and make sure that the mounting holes on the powersupply line up with the holes in that plate. As you might have guessed by now, that's where you mount the extra powersupply! The way I wired it up was to jumper out the switch wires on the supply, and then I hooked the power cable coming out of the Bomac to the AT powersupply, and then using a monitor powercable (for PC's) I went from the PC to the Amiga powersupply, so that both come on with the one switch, and with only one wire plugged into the wall, as it seems when there are Amiga's around there are never enough power outlets! 🙂 I hope this info helps. -Mike Schiller In sunny Fort Lauderdale