CompuServe Messages

Chris, Ok… I couldn't come up with a Firmware # for the scanner, but there were two numbers on it… The first was the serial # 0Y90006173. The second was unmarked on a small label and was B01608001UA168059. My DIP switch settings are: Switch 1: ON/OFF/OFF/ON/OFF/OFF/OFF/OFF Switch 2: ON/OFF/OFF/OFF/OFF/ON/ON/OFF I setup my Amiga 4000/040/25 with only the original software, aside from ADPro. I WAS able to get the scanner to respond ONCE if I turned off the cache then turned it back on, although only for the Preview mode. The fine mode would only cause the scanner to go immediatly into the E-1 alert, unless the data caches were disabled first. For the validity of cross-testing, I just want to be sure that the system you are testing the scanner with is an A4000/040 25mhz with OS3.0… Also, the Copyback data cache needs to be turned on to show this problem. The version of the 68040.library in my system is 37.30… I can't think of anything else to add at this point.