#No Dialtone command
3 messages in this thread
Is it possible that anyone can tell me how to disable the "NO DIALTONE"
feature from my modem.
When I am using the modem to access C-serve & other BBS's I like to set my
phone line to CALL DIVERSION (i.e If my phone line is busy then any
incoming calls are diverted to another phone number of my choice). The
trouble is that when CALL DIVERSION is set the phone exchange gives a
intermittant dial tone which the modem does'nt reconise.
So is there a command I can send to the modem to turn "NO DIALTONE" off. I
am using a Supra Fax modem Plus V.42bps
Thankyou!
Darren.
// On AutoPilot from the U.K,
\X/ With a little help from Mercury Communications.
Try adding the AT command: X3 to your init$.
X3= Dial tone detection disabled (blind dial) but still detects busy
signals.
X commands are the ones that control these things… check it out in your
modem manual.
Michael,
Thanks for the advice.I added the X3 to my init$ & it now disables the No
Dial tone detection.
I would have looked in the modem manual If I had one, I am still waiting
for the store who supplied the modem to send me the manual.
Anyway thanks again for your help.
Darren.
// On AutoPilot from the U.K,
\X/ With a little help from Mercury Communications.