CompuServe Thread

Kelly, I cannot access my HP SCANJET II xc from within Corel-Trace nor from Photopaint. Corel-Version is 4.0. Following are the relevant files : Autoexec.bat : @echo off LH /L:1,46544 C:\MSDOS\MSCDEX.EXE /V /D:MSCD001 /M:15 C:\MSDOS\SMARTDRV.EXE /L /X LH /L:2,17184 C:\MSDOS\KEYB GR,437,C:\MSDOS\KEYBOARD.SYS /E VERIFY OFF PROMPT $P$G SET TEMP=C:\TEMP PATH C:\MSDOS;C:\ALDUS;C:\WIN31\EXCEL;C:\PM4;C:\;E:\CLIPPER5;E:\CLIPPER5\NG;E:\TOOLS C:\WIN31;c:\win31\clip4win;c:\msvc\bin;C:\DESKSCAN;c:\Win31\Twain\corel4 C:\WIN31\TWAIN\COREL4\HPSCANER.EXE /1 C:\MSDOS\SHARE.EXE /L:500 /F:5100 SET SOUND=C:\SBPRO SET BLASTER=A240 I5 D1 T4 C:\SBPRO\SBP-SET /M:12 /VOC:12 /CD:12 /FM:12 SET CLIPPER=F:75 SET INCLUDE=E:\clipper5\include SET LIB=E:\CLIPPER5\LIB SET OBJ=E:\CLIPPER5\OBJ WIN Config.sys : DEVICE=C:\MSDOS\SMARTDRV.EXE /DOUBLE_BUFFER DEVICE=C:\MSDOS\HIMEM.SYS DEVICE=C:\MSDOS\EMM386.EXE NOEMS WIN=ED00-EFFF WIN=EA00-ECFF DEVICE=C:\ASPI4DOS.SYS DEVICEHIGH=C:\DESKSCAN\MINI400I.SYS DEVICEHIGH=C:\DESKSCAN\SJIIX.SYS BUFFERS=15,0 FILES=75 DOS=UMB LASTDRIVE=Z FCBS=16,8 DEVICEHIGH /L:2,12240 =C:\MSDOS\SETVER.EXE DEVICEHIGH /L:2,11632 =C:\SBPRO\DRV\SBPCD.SYS /D:MSCD001 /P:240 DEVICEHIGH=C:\MSDOS\GMOUSE.SYS SHELL=C:\MSDOS\COMMAND.COM C:\MSDOS\ /E:1024 /p Cortwain.ini : ; [ZSTWAIN.DLL] path=C:\WIN31\TWAIN\COREL4\zstwain.dll ; the Microtek 600Z may require that the width and height of the flatbed ; be limited in order to work properly. These units are in 1200ths of an inch. [Z_Microtek_600Z] WidthLimit=10200 HeightLimit=13200 ; model Canon CJ-10 ( or BJ-10 ) ; [CANON] IPUBJS-SCANNER=canoncj1.dll ; the warnings and unloaddriver entries should be there ; [DEBUG] warnings=off unloaddriver=on lastwarningcode=1006 lastwarningmsg=Unable to load scanner driver DEFAULT SOFTWARE DRIVER driverName=DEFAULT SOFTWARE DRIVER [DESKSCAN_II] path=C:\WIN31\TWAIN\COREL4\zstwain.dll [ScannerInfo] ;-End- [Z_HP_ScanJet_IIc] EdgeDetect=255 BorderErase=255 Outline=255 CurrentScanner=c:\win31\twain\corel4\zstwain.dll ——- Any suggestions ? Your help would be greatly appreciated… TIA Erhard