CompuServe Thread

Supra Ships PC Emulator

23 messages in this thread
#50532From: Supra CorpFeb 26, 1992 1:19 AM
Supra will start shipping the KCS Power PC board this week. It allows Amiga 500,2000,3000 to run PC software. The board fits in the trapddoor RAM board area on the A-500 An adapter board will be available soon for the 2000,3000. The latest software adds color EGA,VGA video modes and supports EMS and most hard disk systems. Amiga Magazin in Germany rates it the best PC emuator for the Amiga. Alan
#51005From: Jim VentolaMar 1, 1992 10:36 PM
How much will the system be for an A3000? (emulator and adaptor). How fast is it? What are the limitations? Thanks.
#51079From: Jim SakladMar 2, 1992 5:28 PM
What can you tell us about the KCS Power PC board? Processor? 8088? 286? 3? 4? <grin> How 'bout speed (mHz and or Norton SI)?
#51454From: Steve JessMar 5, 1992 12:33 AM
Does your board use the IBM expansion slots in the 2000/3000?
#52121From: Supra CorpMar 10, 1992 4:57 PM
Steve No it doesn't allow use of the IBM slots in the 2000/3000. Only the bridge board from Commodore allows this. Kenny Supra Tech Support
#52157From: Scott TricklerMar 10, 1992 10:39 PM
Do you think Supra will release a PC emulator that would use the PC slots in the 2000/3000? I would rather buy something that would use the slots. Scott
#52184From: Kelly JordanMar 11, 1992 7:16 AM
Scott, If you want a PC emulator that uses the PC slots, why not just buy a BridgeBoard. They are pretty low cost right now, or you can wait a little while for CBM to release the 386SX BridgeBoard. Somebody posted a price for the 386SX BB a couple of weeks ago and it wasn't too bad, either. 73, Kelly
#52213From: Scott TricklerMar 11, 1992 3:51 PM
Thanx Kelly, i was unaware of a new CBM bridgeboard, shall keep an eye open for then heh, talk to you later. Scott
#52334From: Supra CorpMar 12, 1992 4:42 PM
Scott No right now I don't think Supra will release anything like that. Kenny Supra Tech Support
#56418From: Scott HarrisMay 3, 1992 10:57 AM
Sounds interesting. I have lots of questions: 1. What processor does it use? Would it be possible to upgrade the processor in the future? 2. When you say it supports VGA, is that color or monochrome? How many shades/colors? And will it display VGA video on the usual 1084s monitor (albeit with flicker)? 3. Is there any way to hook up a single monitor for VGA and flickerless Amiga native video – i.e. is there a way to use it in conjunction with some kind of flicker fixer? 4. Does it recognize the Amiga mouse as a Microsoft (or some other kind of PC standard) mouse? 5. Is there joystick support? 6. Will it recognize Amiga RAM as extended/expanded memory? 7. Will it recognize a 720k floppy in the Amiga's internal floppy drive? Is there a way to connect any other kinds of floppy drives? 8. Does it take over the machine when in use, or can it function simultaneously with one or more Amiga programs? 9. Can you transfer data files between the Amiga and PC environments? 10. Does it recognize the parallel (printing) and serial (modem) ports? 11. Can a hard disk be shared by the Amiga and PC environments? Thanks, ===Scott
#56517From: Supra CorpMay 4, 1992 8:36 PM
Scott >1. What processor does it use? It uses a v30 processor which is a 8088 replacement. There is no way to upgrade the processor. >2. When you say it supports VGA It does support VGA, color with 4 colors on a standard 1084 monitor. But there is flicker. >3. Is there any way to hook up a single monitor for VGA and flickerless Amiga No there is no support on the board for this. >Does it recognize the Amiga mouse as a Microsoft Yes it does. >5. Is there joystick support? No. >6. Will it recognize Amiga RAM as extended/expanded memory? No. >7. Will it recognize a 720k floppy in the Amiga's internal floppy drive? Is >there a way to connect any other kinds of floppy drives? Yes it uses the internal floppy as a 720k floppy. You can use the 5.25 floppy Commodore sells to gain access to that format. >8. Does it take over the machine when in use Yes it takes over the machine. >9. Can you transfer data files between the Amiga and PC environments? Sort of but not really. You can't access the amiga side when using the PC, but you can use some of the utilities available to read and write pc floppies under amigados to move data back and forth. >10. Does it recognize the parallel (printing) and serial (modem) ports? Yes. >1. Can a hard disk be shared by the Amiga and PC environments? Yes, you devote a partition to the PC environment. Kenny Supra Tech Support
#56896From: Scott HarrisMay 9, 1992 6:43 PM
re: ========== Is there any way to hook up a single monitor for VGA and flickerless Amiga No there is no support on the board for this. ========== Ok, no support on the board… But there is a third-party flicker fixer for the 500 (I forget the mfr) – Can the 500 contain both that flicker fixer and your PC emulator at the same time? And if it can, would _that_ allow you to hook up a single (multisync) monitor for both VGA and native Amiga operating modes? Thanks, ===Scott
#57025From: Supra CorpMay 12, 1992 2:03 AM
Scott I believe ICD has a flicker fixer that will fit in the 500, and yes it will fit in there along with the PC Power board. But even with the flicker fixer you still won't gain colors in the vga mode, but it will help the picture from flickering. Kenny Supra Tech Support
#57060From: Nancy DevittMay 12, 1992 1:22 PM
RE the VGA hookup…..You can probably accomplish this by utilizing a switchbox, one side of which is connected to the VGA display, the other side of which is connected to the Commodore display. (In my case, it's the Flicker Fixer.) This works fine on my Commodore BridgeBoard, and it should work well with the Supra…..Nancy
#56486From: Steve Bennett/SYSOPMay 4, 1992 1:16 PM
Will the A2000/A3000 adapter board allow for use of the IBM slots for further expansion? If so, can one use a Super VGA board with it? And what type of processor does the board use? .–>Steve Bennett
#56519From: Supra CorpMay 4, 1992 9:30 PM
Steve No the A2000/A3000 adapter won't allow for the use of the IBM slots. The board uses a v30 processor. Kenny Supra Tech Support
#59398From: PETER MCCABERYJun 7, 1992 1:15 PM
I LIVE IN UK AND I USE KCS PC EMULATOR I THINK IT IS ONE OF THE BEST BIT OF EQUIPEMENT I HAVE PURCHASED FOR MY AMIGA ALSO FANTASTIC HELP AND BACK UP FROM THE U.K DEALER BITCON DEVICES IN GATESHEAD TYNE AND WEAR PETER MCCABERY SSSS
#59433From: Supra CorpJun 7, 1992 9:49 PM
Peter I glad you like it. By the way you can stop yelling now. (All caps are used to indecate raising ones voice. 🙂 Kenny Supra Tech Support
#59455From: Michael SheaJun 8, 1992 12:09 AM
Hey "Supraman", Tell me about this PC Emulator of yours. Guess I have had my head in the sand… <<< Michael Shea >>>> <<< 76665,3360 >>>>
#59544From: Supra CorpJun 8, 1992 7:30 PM
Michael The PC Emulator is called the PCPower board. The board is made by KCS and distributed by Supra here in the states. It fits in the 501 slot of a Amiga 500 and with a adpator in a Zorro II slot of a 2000. Kenny Supra Tech Support
#59718From: Denny Atkin [COMPUTE/AmiJun 9, 1992 10:15 PM
Hey, what ever happened to the 68000 accelerator?
#59739From: Supra CorpJun 10, 1992 12:44 AM
The 25Mhz 68000 should ship this fall. We put some other products ahead of it in the production engineering schedule. We have a couple of new awesome Amiga products that are close to production. We won't talk about them until they are available–:) Alan
#59840From: Brian CowanJun 10, 1992 11:42 PM
Got "bit" by the SupraFAX debacle, I guess. No? – via Whap!