CompuServe Thread

Brian, Actually, I wound up buying a NEC Multisync JC-1401P3A monitor for half the advertised price of the CTX from a local man. It appears to come up in analog mode, but I keep getting a 1701(C) — Controller #0 Error. Anyway, it responds to the keyboard. I just have to get my 386 bridgeboard to boot properly. It has 5 Meg. > Date 21.02.94 System Speed HIGH > Time 16:54:00 DRAM Wait States 0 > Diskette 0 360K Page Mode ENABLED > Diskette 1 1.4M On-board Base Memory 640 KB > Hard Disk 0 NONE On-board Ext Memory 4096 KB > Hard Disk 1 NONE Off-board Ext Memory 0 KB > Video COLOR 80 VGA/EGA Shadow ENABLED > BIOS Shadow ENABLED ———————^^^^^^^^ When I change the Video to VGA/EGA, the monitor works. DF0: is my shared drive, a 1.4M high density. Drive A: is the 5.25 inch drive that came with the XT bridgeboard. There is a G-Force 030 with its 5 Meg mapped to Extended memory (Jumper 12 is pulled). There are hard drives on the A2091 and the GVP accelerator. The BB is using a hardcard with two 20 Meg hard drives. The 1084S monitor is attached to the Amiga 2000HD. I am using Dave Cinege's multi-function card as the VGA controller. The only change was to JP5 to use IRQ 5 instead of IRQ 7 to allow use of LPT1 or LPT1X.