This is an archive of CompuServe forum messages from 1985 to 1995, as saved in transcripts by John Foust.
Search Results (1,727 messages)
ROGER! How the H..l are ya'! >> Actually I "interviewed" thats a far cry from wanting to work someplace, I go to medical conventions for BioFeedBack too. That doesn't mean I want to be a theripist. BTW It took me about 3 min. to actually get to know the Owner…
"ASDGTechSupport Entity" Since your getting ready for the Trade show it wouldn't make any sense for us to be bugging ya. I myself have done mannnny trade shows being in the Electronics/Computer Industry These many years. I once did (in 1986) two Las Vegas Shows Back-to-Back 14 Days Straight. The…
PMJI….._Please_ let me know if the QEMM solves your speed problem related to having over 16MB of Ram on the Gateway 4DX2-66V as I have a client that just ordered one from them with 32MB of RAM (Maybe it was 64MB-he was debating this.) and has purchased 3D Studio from…
David you seem to have a tendency to try to put words in others mouths as well as bring up examples of people and attitudes I do not nor have I ever aggreed with or espoused. While doing this you try to associate me with these instances.. Can't you focus…
Great improvement on my basic 101 come back Chris….I'm going to try your version out this weekend. Can you tell I've been writting some basic intro classes James.
PMJI….I've left a message for Gina to call me when she gets back. Regarding: > When I talked to her last week she told me you only had a couple soooo I guess you've been busy. A. I will be signing up as a dealer to handle your Driver. B.…
What are you saying here….You wouldn't be aluding to their possible amount of time spent "supporting" the product in your particular case now..would you? James.
David….When did I ever say _Anything_ about Jerry Fallwell….Lord! he hasn't been in the News Since the Mid-80's….You _do_ know what Year this is don't you Comrade? I think you've missed a couple of Cell mettings somewhere along the Ol' Party line. James.
Steve, Opacity mapping uses a picture to tell 3D Studio where an object is transparent. It does this by looking at the picture in a special way. Black Areas of a picture become transparent and white areas become opaque. Medium shades of Gray take on various percentages of transparency. The…
David…PMJI….You wouldn't happen to be talking to a prospective Client in Wausau about this would you? If so, you better call me..I've got many hours invested in a very similiar Q&A and: A: If its the same Client that I was talking to…You might be wasting your time….Ask him if…
> People Like Joeseph Stalin and Karl Marx Eh' Comrade James
Hello Dominic, I'm no expert but you might want to try this: Create two large spheres with the tops cut off. ( around the object that will be burning ) Create One large tube with the top flared out on top.^ (center on spheres) The spheres will be our fire…
Roger…..
Your raving David. James.
Thanks Angelo.. I'm sure you will pick up at least two additional subscriptions for sure maybe more for your efforts. James.
Thank you for the supportive comments Don. James
Thats what i was afraid of…no way to do single frame animation. Thanks Larry.
Jes' tryen ta' sauv' yaw immmotal soul. James
Larry…PMJI I see you're familiar with the Sony Hi 8 Stuff. I just left a new 3DS client today that showed me a 2 year old Sony EVO 9700. He uses this for his master Hi8 and goes out to four Panasonic AG1250's to make copies. What I need to…
David…I don't quite know how to say this so I'll Just Say it. You seem to have some sort of problem with "Religion"…You've taken a shot at the "Religious Right" in every diatrabe so far. America has embarked upon a path of socializm, are you aware of the "religious nature…
Uh…David…. refresh my memory will you…who was the controlling party in power for the past 30 years….you know…Congress! You can't make me beleive that whomever happens to be President is any REAL controlling factor as far as the REAL business that gets done in this country. I think you really…
Pentium and 3D Studio!
Message #46923
Thanks for the response Alan, Didn't mean to take so long getting back. I've been busy with _New_ Clients.."Thank God". Now that the word is out on 3D Studio in my area due mostly to my efforts I see I've got some newly authorized dealers to welcome..gotta go warm up…
Hi David…Guess that's why I haven't heard much from youlately…Good Luck. Give me a Call when you have a spare min. OK Buddy . James M. Murphy Autodesk Authorized Multimedia Dealer Green Bay, Wisconsin (414) 435-7345
3rd Dimension Next Issu
Message #46921
Angelo…..PMJI I happen to be catching up on old thread and saw this message from yourself….rmemebered that I wanted to ask you if you could send 6 extra copies to my address. I've got two new 3DS Clients and four Students coming to a 3DS Class this month and I…
Cadence Reprints.
Message #46726
This is also addressed to all other MM Dealers interested. Angelo…. Regarding the CADENCE July 1993 Issue. I'm sure you've seen the great articles on 3DS regarding Forensic/Legal representations in court rooms. I happen to be interested in getting some reprints of this article and have spoken to Autodesk and…
Skydiving graduate
Message #46709
Uh…. David…. Prove What! Mr. C. has already UnProved Himself. If your still supporting him then I don't know what to say to you. James.
Bryan, Thank you for the response, However I am a dealer..Just thought I could get faster service on the Forum regarding additional Tech. Support for the older Drives and Drivers. I tried getting through on the SCSI Phone number 613-728-1010 but had no luck. No longer a good #!! Soooo…
#Corel SCSI
Message #49590
Please excuse my jumping in here but I saw your reference to the Corel SCSI. I Still have the "Original" Blockbuster CD-ROM Bundle that includes the LS2000 8bit SCSI controller with the Toshiba CD-ROM Drive model XM-3301 (March 1991 Ver1.4 variety). What could I possibly do to upgrade this set-up?…
Rog' Murph' I've given this further thought. > YES! After first making Damn Sure you know the Chipset for the Graphics… Zenith should have an "identifiable" Chip on the board somewhere, barring this you would have to try to work with their tech. support people. Try your Free Vibrant Graphics…
Mornin' Rog' I'll probably regret this…but here goes. What's in this for you? Whoever sold the equipment _And_ the software holds the ultimate responsibility. Even more so than the Vendors (Autodesk & Zenith). If someone tells ya a square peg fits in a round hole then make _them_ prove it.…
Dave, Please excuse my jumping in here but I saw your reference to the Corel SCSI. I Still have the "Original" Blockbuster CD-ROM Bundle that includes the LS2000 8bit SCSI controller with the Toshiba CD-ROM Drive model XM-3301 (March 1991 Ver1.4 variety). What could I possibly do to upgrade this…
Roger. excuse me for jumping in here but you wouldn't happen to have an actual list of the different Chip sets with corresponding performance ratings, I'm in the process of compiling a technical support newsletter and this would be extreemly benificial. James M. Murphy James Murphy Consulting Green Bay, Wisconsin…
Craig: Didn't mean to jump on this so hard.. but as a dealer I get excited when I hear that a software package I "Just Got Authorized For" may no longer be promoted by the Vendor. You can understand my consternation. Regarding the AutoCAD and 3D Studio Etc. Expertise thing….…
Nik: Thanks…. I'll be given em' a ring in the mornin'. Appreciate the heads up on this. James M. Murphy
Craig:
Uhh..Thanks John. Whats 🙂 debabilized? James.
John: You've got Dr. Leary's home phone…. Hmmmm… Be careful what ya wish for… seems to be running through my head right now. Seriously John, I wouldn't want to impose on Dr. Leary but I would truely like to meet him some day. Perhaps I will be attending an event…
Nik: Thanks for the input regarding the Path files question. I've got to believe there is a more efficient way of doing this. Being a Small Company I use my 486-50MHz for "EVERYTHING" Its increadable that everything works together as well as it does. Now that I've taken on the…
David: > Totally embarrasing on my part….Of course the chances of ever running in to them again were zip cause' I was heading back to Wisconsin the following week. Yep' Ol' Jesse sure had a good laugh on the Midwestern boy. Maybe I'll get lucky at one of the AutoDesk…
Angelo: How's this sound for a "Dream Rental System" . Two Ampex CVR-70 Betacam SP Recorders . One Ampex CVR-75 Recorder . Grass Valley Model 100 Special Effects Switcher Interfaced with Ampex Ace 25 and Grass Valley AMX-100 Two Channel Audio Follow Video Option . Four Panasonic 9" B/W Monitors…
Martin:
AAAHemm….. Well Books no, But Video Tutorials. If your interested give me a call. James M. Murphy (414) 435-7345 Or leave me a message on the forum. I'll be glad to E-Mail you a Brochure on the Videos. James M. Murphy
#42667-
#RenderEngine TC/VTV-2000
Message #42695
Gary: Thank you for the response.
Martin: Its been a While…regarding rapelling…. I still have my "D" Ring Leather Gloves and Boots….Uhhh but I've forgotton how to make the Swiss Harness and my wife Hide my rope…. Hummmmm I wonder why? Is that significant? James M. Murphy
Hi Dave: Did You Get the Screen Savers?…….. The Girls Say HI! Later, Murph'
Roger: What the H..l are you talking about? Your message made no sense…when did I ever try to speak for the state of Wisconsin? Perhaps you've gotten a conversation between James Murphy and James Murray mixed up.. or…. misunderstood something _I_ said because I sure as H..l didn't presume anything.…
Andrew I've got a call in to Dave Avgikos at Digimation. When he calls back I'll ask him about the PAL Format and if he's got distribution overseas. Otherwise I'd be happy to sell the tapes to you. Later, gotta Go figure out why my new copy of PC TOOLS…
Angelo, Sooooo is the news letter going to be over 20 pages and run in High Color Glossy OR WHAT? Seriously, I'd like to get a Copy. James M. Murphy James Murphy Consulting 1431 Garland Street Green Bay, Wisconsin 54301 (414) 435-7345 Later, Murph.
Tim, Just my Two Cents worth here but you may want to look around for information on a Competitive Upgrade to CorelDRAW 3.0 Its only $149.00 James M. Murphy
Thanks Jeff, I'd hate to think That I was going to spend a great deal of effort, time, not to mention money educating potential clients just to have the product opened up to a bunch of "Sales-Teams" With commision only attitudes. Not that AutoCAD Dealers aren't a Wonderful bunch of…
Page 34 of 35