This is an archive of CompuServe forum messages from 1985 to 1995, as saved in transcripts by John Foust.
Search Results (33 messages)
2 megs is the max on chip ram. // Gary B. Flying High From Oxnard,California \\//On AutoPilot 1.80..With my 4000 and Emplanted MAC & PC
#WarDialer C64 Amiga
Message #197731
Does anybody know of a program for the amiga that is simular to wardialer for the C64? It took 2 phone numbers and dialed every number in between and would print out the results.I want to find locale BBS numbers with it in my city. Thanks in advance // Gary…
go to the amigavendor forum and download ap.lha (autopilot) it is GREAT for compuserve use,then after you create forum catologs you can pick out a shareware terminal program from one of amigausers forum. // Gary B. Flying High From Oxnard,California \\//On AutoPilot 1.80..With my 4000 and Emplanted MAC & PC
I was asking, how did you get them transfered to the amiga? // Gary B. Flying High From Oxnard,California \\//On AutoPilot 1.80..With my 4000 and Emplanted MAC & PC
The ALL NEW PC Emulator must be out of reach of use common folk,I logged on yesterday to find nothing of use to me.I was only able to get dos to run and not much better then PCTask 2.0 with my emplanted pc on my 4000.
I have The 64 EMULATOR by ReadySoft with the cable for the 1541 but the programs lockup my 4000 even with degraders and port adaptors (1000 to 4000) if I could figure out a mountlist maybe I could read the c64 disk on my amiga 5.25 drive.I have tried the…
C64 disk
Message #46807
Does anybody know how to write a mountlist to read C64 disks on a 5.25 amiga disk.I need to transfer a rom image from my C64 to my Amiga for the FRODO emulator. // Gary B. Flying High From Oxnard,California \\//On AutoPilot 1.80..With my 4000 and Emplanted MAC & PC
#C64 Rom
Message #197039
Does anybody know how to write a mountlist to use a 5.25 amiga disk to read c64 disks.I have the rom image for FRODO the c64 emulator on a c64 disk and no way to get it to my amiga. // Gary B. Flying High From Oxnard,California \\//On AutoPilot 1.80..With…
#c64 rom
Message #196881
Does anybody know a way to get my 4000 to read a c64 disk.I have a 5.25 amiga drive but do not know how to mount it to read the disk.I need to read the file I created for frodo, the new c64 emulator,on my c64. // Gary B. Flying…
go to amigauser lib archivers/crunchers // Gary B. Flying High From Oxnard,California \\//On AutoPilot 1.80..With my 4000 and Emplanted MAC & PC
Go to amigavender forum and down load AP.lha and start saving money by reading everything off line.I've used maccim after getting Autopilot(AP.lha) and deleted maccim after two uses. // Gary B. Flying High From Oxnard,California \\//On AutoPilot 1.80..With my 4000 and Emplanted MAC & PC
You never used an Amiga have you? I have used PC's and Mac's and can't beleive people pay money for such a hard system to use. Considering that my 4000 is clocked at 25 and not 90 like your Pentium and can move graphics just as fast,It would be nice…
I got a driver from one of the mac forums but i had my emulation running on 7.0 before i got the 7.5 cd. // Gary B. Flying High From Oxnard,California \\//On AutoPilot 1.80..With my 4000 and Emplanted MAC & PC
the upgrade 7.5 on cd is the full system,but you must have the right cd driver on the boot disk that comes with the cd.I bought a 4x cd but can't tell because the video emulation is to slow on a stock 4000.when you boot the mac emulation it will…
Get Autopilot you will save enough in connect fees to pay for AP in short order and you'll love the program. // Gary B. Flying High From Oxnard,California \\//On AutoPilot 1.80..With my 4000 and Emplanted MAC & PC
I'm using a program called toshiba cdrom 1.5.2,and the drive seems faster then my emulation can handle at this time.If utilities unlimited ever starts development and ships thier MP + vidieo board that might change.
Help?
Message #180030
try autopilot in the amigavender forum for cis. // Gary B. Flying High From Oxnard,California \\// On AutoPilot 1.74..With my 4000 and Emplanted MAC
#179867-
cd-rom
Message #180029
I'm using a toshiba 3501 with my 4000 through my emplant scsi port.It works perfect with the mac with a driver I downloaded from a mac forum,except for audio discs,no can do. On the amiga side it can play audio discs and I can read data disks but sometimes w/data…
IF ALL ELSE FAILS SEND THE ROMS TO UTILITIES UNLIMITED AND THEY WILL DUMP THEM FOR YOU.THATS WHAT I HAD TO DO.IF YOUR USING 4.9 THEN YOU CAN USE MAC 7.5 SYSTEM WHICH HAS FASTER PERFORMANCE. // Gary B. Flying High From Oxnard,California \\// On AutoPilot 1.74..With my 4000 and…
Michael, I put all my monitor drivers from my storage drawer in the devs/monitors draw and it works fine now. // Gary B. Flying High From Oxnard,California \\// On AutoPilot 1.74..With my 4000 and Emplanted MAC
I have not been able to get it to run at all ! The requester comes up for the file I pick one then nothing ? What gives I have a 4000 with 10 megs I would think it should run. // Gary B. Flying High From Oxnard,California \\// On…
I have an A4000 and have not been able to get navigator to run ! Very disapointing. // Gary B. Flying High From Oxnard,California \\// On AutoPilot 1.74..With my 4000 and Emplanted MAC
#EMPLANT
Message #88876
DOES ANYBODY KNOW HOW I CAN GET MY EMPLANT TO USE A HARDFILE , I DID EVERYTHING IN THE EMPLANT MANUAL WITH NO LUCK.MY SYSTEM IS A 4000 W/3.1 AND 2 IDE HARDDRIVES. // Gary B. Flying High From Oxnard,California \\// On AutoPilot 1.74….Long Live The Amiga!
I called them and they told me $200.00 for 4 chips! // Gary B. Flying High From Oxnard,California \\// On AutoPilot 1.74….Long Live The Amiga!
#Hidden cost
Message #88837
This message is for any one thinking of buying the Emplant. On the outside it looks good. Four hundred dollars gets you a Mac II right? Wrong . 400.00 emplant 200.00 mac roms(most mac dealers tell you to get lost) 150.00 mac 800k drive 100.00 7.1 system software and manuals…
#video boards
Message #88789
Thanks Jim for dumping my roms but I still can't get this thing going. I bought the system 7.1 upgrade kit ,the salesmen said it was the complete system without the manuals, tried to run emplant and it can't read the disks.The disk converter can't read them either.I get to…
Rom Dump
Message #88196
Any luck dumping my roms ? Have not heard from you either way and I really want to try my emplanted Mac out. If the roms are no good could you give me the phone # of someone I could buy new roms.I got those when I bought a mac…
CHECK WITH EXPERT SERVICES IN KY. THEY HAVE THE BEST PRICES 100.00 TO 150.00 PHONE 606-371-9690 // Gary B. Flying High From Oxnard,California \\// On AutoPilot 1.74….Long Live The Amiga!
#Rom Image
Message #87829
Any luck on getting a rom image from my roms ? I would like to be on a mailing list (CMail) when you get the 486 module done or any other updates , C64 , digitizer or anything else, videoboard ? You are wrong when you said you could never…
If the Alice ever gets updated to access 8 megs then I could swap out the Alice and change the jumper ? // Flying high on Autopilot from Oxnard,California \\// GARY B.
#Chip Memory
Message #144178
Does anybody know if I change the jumper on my 4000 motherboard that says 2 or 8 megs(I think it said "chip"next to it) , and install a 8 meg simm(if there is an 8meg simm) I would have 8 megs chip,and if the system would use it? // Gary…
Why put the jumper if everything is surface mounted.You can't just remove a chip and install another without risk of damage to the board.There also was a wire being used to jump between pins on a chip ,I think it was the "Buster" chip.Do you know why that was done…
#8 meg chip ram
Message #34494
When I got my 4000 it only worked for a short time,when I got the replacement board and was checking it out I saw a very interesting little jumper. It had three notes next to it.One said 2M,one said 8M, then the good part, it said CHIP RAM next to…