ADPro Problem
ADPro was developed on both a 68020 and a 68030 and was tested on a 68000.
All sorts of memory configurations and stresses were applied. There is no
possibility that your configuration represents a generic problem. What may
be the cause is a loose or faulty RAM chip or other hardware problem. As
far as contributary software causes, ADPro installed the latest
req.library. Try running TAD again in 68020 mode. Since TAD will also use
the library, (and it will probably) work there will be someother root
cause.
(1) check your memory both physically (by pushing on the chips and making
sure they are seated well) and by memory test.
(2) look through your startup-sequence for any recently added system hacks.
(3) ensure that TAD still runs on your machine.
pk