CompuServe Thread

#How 'bout this setup?

11 messages in this thread
#37237From: David McElroyJan 4, 1994 9:09 PM
I've been asking questions for several days about the Video Toaster and related equipment. After listening to everyone and spending most of today watching demos and asking more questions at my friendly local dealer, here's the proposed package. I'd love to hear comments about specific pieces (for good or bad) and also what I should expect to pay for these components: Toaster/040/210 meg HD/18 meg RAM/monitor Toaster Toolbox 4000 A/B roll editor (serial) Toaster 4000 control software Six-channel mixer & interface (Cooper) Panasonic AG-7650H edit source w/TBC (two of them) Panasonic AG-7750H edit recorder w/TBC Panasonic time code gen/readers (three of them) Three Panasonic 13" CT-1383Y color monitors Amiga utilities software pack Misc. cables, connectors JVC GY-X2U S-VHS 3CCD camcorder w/13:1 lens AC adaptor/4 NB-G1U charger Rechargeable 2.2AH battery, JVC Lowel Intro-Kit lights About $50 worth of bulbs Lecro Mini Lav System (ProMini-L) Two hardwired lavaliers, black, flat response w/accys Eng 20 fluid head/TD20 tripod Installation and 12 hours of training Any suggestions about substitutions would be appreciated. I'm especially interested in how much I should actually pay for these things or if someone knows a good, cheap place to pick up any of it. I have my dealer's quotes; I just want to know whether he's giving me a decent price. Thanks in advance. David McElroy
#37281From: Brian JonesJan 5, 1994 10:47 PM
There are a few mail order places that now advertise in VTU. B&H in New York, Discount Video Wharehouse and CVIC,inc. They sometimes list pretty good prices, but more often than not, you have to call. I have never done business with anyone but B&H of the three. You pretty much have to know what you want when you call B&H, but I have never had a problem with them. Their shipping charges are sometimes a little on the high side. Since I have never had any problems, I don't know how good their customer service is. I may catch some flack in this forum, but for the cost of the toaster/amiga and software, the audio mixer, the edit controller and the 3 panasonic decks and the 3 monitors, you could get a non-linear system. You still need to buy one recorder and maybe one NTSC monitor, depending on which system you go with. I don't know what your productions are for (broadcast, cable, industrial, educational) but if I were you I would SERIOUSLY look at this option if you can. You can get a couple of Mac based systems for $25000 to $50000 dollars that are "online" quality (certainly S-VHS quality). These prices include the Macintosh computer and about an hour of digital audio/video storage). It also depends on the format of your productions (10minute, 30-45 minute 2hours???). My suggestion to you at this date is, only buy your acquisition equipment (camera, tripod, lights etc…) and go to NAB in Las Vega March 21-24. The $$$ you spend on this trip would probably be worth it in the long run. One word of caution though. At a show like NAB, be sure to distinguish between what is shipping and vaporware. If you want to continue this, perhaps you should send E-mail as these alternatives don't really fit in this forum. Brian
#37284From: Steve Bennett/SYSOPJan 5, 1994 11:53 PM
>>…perhaps you should send E-mail as these alternatives don't really fit in this forum.<< Absolutely not! This is a great thread… very informative, and exactly what this section is here for!
#37295From: David McElroyJan 6, 1994 11:42 AM
Brian: In light of the sysop's comments, I'm willing to keep this on the forum if you are. I appreciate your input, and I'm interested in some specifics. First, I already have a Mac Quadra 840av that I use for producing printed material. What system could I buy to add to that — at a reasonable price — that would save me this boatload of money? Since I am already using the Mac for other things, it would be nice to simply add to this existing system. My current setup on the Mac is 24 megs of RAM and a 500 meg HD, with a 17" Sony monitor. The reviews I have read in Mac magazines — which are a couple of months old now — say that the software and equipment for Mac-based video are not really ready for "prime time." It seems as though everyone I talk to claims the Video Toaster is a superior product, and it's tested and available now. I also am very much interested in the fact that the Toaster has been around, while Mac-based systems are very new and kind of untested. (Some companies test beta software for a year; others sell it for a year before version 2.0. <g>) As for my use, I need the equipment to produce political advertising for cable and local broadcast and also 15- and 30-minute programs for cable. Also, where can I get information about attending NAB? Thanks again for your help. I do intend to take it slow and (hopefully) not just waste my money. David
#37296From: Brian JonesJan 6, 1994 12:57 PM
You might not save boat loads of money up front. But if a NL system will work in your situation, you will save boatloads of time in the long run, which should = money. 1st off, the toaster is a great tried and true product, but even the lastest product from them them is buggy. They are already getting ready to ship an update to fix bugs from the new release this fall. Bugs will always be (see our discussions about a product called MediaEDitor, a software based editor for the Amiga that is "bug city" for more philosophical thoughts on this). Already having the top of the line Mac puts you in a good position in that area except for the Video Cube (ImMix) as they supply a Mac with their system and won't break it off. They supply a turnkey system, Mac/monitor/cables/disks everything to plug and play. They are also the most expensive. around $50k for the base setup with storage for 1 Hour Digitizing time. They use a proprietary hardware setup so you must buy additional storage from them. All you supply in the video deck. NTSC composite and Y/C video i/o. The newest kid on the block and the one that seems to get rated very high by those who have actually used one as far as picture quality is concerned is the Data Translation Media 100. You are in good shape there. This system requires a Mac Quadra 8xx, 32mb memory, a 14" or larger monitor and they reccommend a quick draw accelerated 24bit graphic card. To this you ad an NTSC monitor, disk drives and video tape deck. The system has both NTSC composite and Y/C I/O. They support any SCSI disk drive (I or II) that meets certain i/o requirements. This would typically take you into a name brand drive. The full blown Media 100 system costs about $14000. To that ad prices of above stuff for a total of about $27k. This should be equivalent or cheaper than bying 3 high end S-VHS decks/full blown toaster-Amiga setup, time code editing hardware, audio stuff etc..) The other player is the MediaSuite Pro from AVID. High end AVID systems are the defacto standard brand in the "professional" world for digital OFFline editing. They were basically there first and have the largest dealer and support network built up. Avid MediaSuite Pro is somewhat like the Media 100, you supply your own Mac that is fast enough (Quadra 950 or better). Used to, they ONLY worked in a 950, but I think they'll work in the Q8xx Macs now. (Don't buy one til they do!) They come with about 4 cards that need to plug into your mac, so slotspace must be available. There is a big controversy over the drives with AVID systems. This has been raging in the BP forum for a few months. Basically to be safe, you need to buy Avid drives (more $$$). The base system for the MSP is $10K. I don't have Avid drive prices handy. I haven't done any one system justice and have only covered Mac systems because you need an online system, not offline. There are some PC based products, but I don't think any of them that are shipping have the picture quality to be considered "on-line". Who knows what will be a NAB this year though. There is supposedly an Amiga based basic non-linear editor called Broadcaster32, but it was vaporware last time I checked. I also saw a rumor here on CIS that NewTek will have a NL system next fall (so maybe it will be out in beta at NAB) for about $26k. I have no idea what would be included in the $26k or where that info came from. At that price, depending on storage they supply (if any), they will no longer be the bang for your buck champions unless the quality of the video image is way better than the other guys (I assume that $26k wouldn't include an Amiga). One quick note I just thought of. If you were looking at toasters, did you look at the FAST setup, you can get a Mac version of it for about $6000. They are beta testing a digital compression board that is supposed to integrate with the system. The basic difference I see here is, the compression system will just be like an instant access tape drive. The editing would take place in a more traditional interface environment, just reducing the search/shuttle times down to nothing. I certainly believe that with good, well lighted S-VHS source footage shot on a good camera, that you will see as good or better results from these systems as with traditional tape editing. If these are for spots, I assume you would be destributing 3rd generation to the stations (source->edited master->station dubs). This is pushing the limit for S-VHS. You could make your station dubs right from the NL setup, being only a second tape generation. However the price for gaining the tape generation is the softness introduced by digitized data in the NL arena. You have to see this to know what I am talking about. Some systems are barely noticeable, others it is very obvious. The softness is no more objectionable than the fuzziness of a 3rd generation S-VHS tape. BTW, will your station accept S-VHS for broadcast ? The bottom line is, when you have $$$ in your pocket and are ready to buy, go to all of these people (thier nearest dealer). Last summer they were bending over backwards (AVID and ImMIX) to make the sale. They were offering to set up systems (in your facility) for week or month long hands on. You must go hands on before you buy because the interfaces are all different. If you are a Mac-type person, you will probably like the straigh Non-Linear interfaces better than something like the FAST traditional interface. There is just too much to cover here, so I'll leave it up to you to ask more specific questions. Call AVID, DataTranslation, ImMIX and any others and they will send you a package and a demo tape produced on their own systems so you can take a look. The longer you wait, the cheaper disk drives and peripherals get. Oh yeah, with a digital system, ad about $1500 for an 8Gigabyte DAT or 8mm backup tape drive. Info on NAB?? You mean tickets. If these guys see you as a serious player, they will probably give you tickets to NAB. Matrox gave me tickets to Comdex (supposedly $75 value to general public) when I wrote them for info. I even almost got to go ! Brian
#37300From: Peter GreciJan 6, 1994 3:26 PM
I LOVE B & H Photo, but I don't have the problem of High shipping charges since I'm a NYer.Great Service and Good Prices and Large Selection. BTW B & H has a Online Rep here on Compuserve. Just pop over to the Photo Forum and leave a msg to Steve Schwartz.
#37302From: David McElroyJan 6, 1994 3:57 PM
Peter: I checked in the photography forum and couldn't find a Steve Schwartz listed in the membership. Is there more than one photo forum? Do you happen to know Schwartz's CIS address? Or even just a phone number for B&H? Thanks. David
#37693From: Laurie CarrollJan 16, 1994 8:47 PM
Brian, There is a non-linear system now available for the Amiga from a company in Australia, a set-up is due to be delivered to a local Video company here in Auckland this month. I have passed on some details to a couple of people here on the Amiga Forum. They had a demo setup at the WOC show in Sydney Well, just went and phoned the local company for some info, The system costs NZD 110,000 to NZD 200,000 . The system they are getting is costing about NZD 140,000 and includes 3 A4000's/ OpalVision/and a total of 14Gb hard-drive storage for the video. This gives 112 min of video at a compression of 6-1. They will change the Opalvision to a "DFS500 Sony" board. (I dont know what this means). The system works in realtime in that 60 mins of video on tape will take that long to load to disk. But they expext to be able to reduce the editing time from 2-3 days down to 1 days work. The software is failsafe in that they will be able to switch off any of the 7-8 HD's or 1 of the Amiga's if faulty, while work is in progress and the system will recognise this and swith over to the other available HD's/Amigas. He mentioned that there is a separate controller for the A4000's. There has been a delay inthe instilation due to a new faster HD becoming available, so they expect to start recieving the hardware on 01/Feb/94 and will have the system up and running in a few days. Their current system is based on Amigas and is used for production of Christian broadcast TV/videos for Tonga/Samoa/Africa/Europe and some to the USA. The contacts are: Sterling Video (New Zealand) Phone 64-9-626/3008 Fax 64-9-627/8140 Address: PO Box 48036 Blockhouse Bay Auckland New Zealand Attn Dave Curle Colour Computer Systems (Australia) Phone 61-9-375/3018 Fax 61-9-375/3019 Address: 288 Alexander Dr. Dianella, W.A 6062 Australia Attn Don Sforcina Trust this may wet your appetite. Laurie Carroll AKL NZ Longdistance Autopilot
#37735From: Brian JonesJan 17, 1994 8:07 PM
Laurie, Just when I think I have a handle on it….another play jumps in. Am I to understand from your message that all systems have redundant Amigas and HDs for fail-safe operations, or just this particular system ? Also, how do I convert to American $$$. Thanks for the info. Brian
#37781From: Laurie CarrollJan 20, 1994 5:06 AM
Brian, The current conversion rate from NZD-USD is 0.56 ie NZD/0.56 =USD The HD's are apparently redundant (there are 7 drives to make up the total storage I quoted) and can be switched off and the software will recognise this and use the remaining drives. He wasnt very specific about the 3 A4000's but I undertsnd the the same goes for them, I will be able to pass on more concrete info when they have it up and running.It was my understanding that the "redundancey" was a standard for the product regardless of the system size. Will give them a ring tommorrow and confirm that. BTW the system is produced in Australia so the exchange rate from AUD/USD may effect the price to you, the NZD figures I quoted should be in the ballpark for you.
#37294From: Chris N.JulsonJan 6, 1994 11:31 AM
David, I think Brian has a good option. Get your basics and then go to NAB. Non-linear is the next step, and will save lots of time and $$ in the long run. Specific point of interest: you have not included a digital audio card, very useful item for fix'n and chang'n audio for video. Take a look at the Sunrize bd. Also, look into the Mackie audio mixers, their specs are great and so are the prices, plus Mackie has an automation option for their 1604 mixer. This should make a good thread. Chris—> via AP