This is an archive of CompuServe forum messages from 1985 to 1995, as saved in transcripts by John Foust.
Search Results (255 messages)
#81693-
Prism Upgrade
Message #81742
I will bite my tongue then, I mentioned that they weren't IFF after talking with Dave Milligan (of CLIMate fame) and he mentioned that he thought that they were (x) amount of line from the left end of where the brush was grabbed. Stan
#81693-
Prism Upgrade
Message #81742
I will bite my tongue then, I mentioned that they weren't IFF after talking with Dave Milligan (of CLIMate fame) and he mentioned that he thought that they were (x) amount of line from the left end of where the brush was grabbed. Stan
Prism Upgrade
Message #81077
As the publisher of Prism, I have tried to be very sensitive to the needs of the users of our software. There seemed to be 3 main complaints/gripes of Prism. 1). The lack of a 4096+, or clean-up mode, 2). No CMAP in the ILBM header file, so some programs…
Prism Upgrade
Message #81077
As the publisher of Prism, I have tried to be very sensitive to the needs of the users of our software. There seemed to be 3 main complaints/gripes of Prism. 1). The lack of a 4096+, or clean-up mode, 2). No CMAP in the ILBM header file, so some programs…
Prism Update!
Message #80127
Impulse, Inc. is pleased (finally!) to announce that an upgrade to Prism is now available. The upgrade is now called Prism Plus, and contains the following enhanced features: 320X200 and 320X400 Interlace modes Full CMAP compatability with all known IFF HAM file viewers and programs Full Genlock compatability with overscan…
Prism Update!
Message #80127
Impulse, Inc. is pleased (finally!) to announce that an upgrade to Prism is now available. The upgrade is now called Prism Plus, and contains the following enhanced features: 320X200 and 320X400 Interlace modes Full CMAP compatability with all known IFF HAM file viewers and programs Full Genlock compatability with overscan…
Ed; The contracts we offer give the author the right of "Oversight" accounting, meaning the author has the right to inspect our books every 6 months if he or she desires. If there is a discrepancy, there is an adjustment made to the next due royalty payment. Assignment of the…
Ed; The contracts we offer give the author the right of "Oversight" accounting, meaning the author has the right to inspect our books every 6 months if he or she desires. If there is a discrepancy, there is an adjustment made to the next due royalty payment. Assignment of the…
#67478-
#Genlock – Resistor #55
Message #67537
The first resistor cut only eliminates jitter during drive access. the other mods, have to do with color saturation and picture stability. There is also a peak to peak adjustment on one of the pots. We started to do the mods this afternoon, and then noticed that CBM in it's…
#67478-
#Genlock – Resistor #55
Message #67537
The first resistor cut only eliminates jitter during drive access. the other mods, have to do with color saturation and picture stability. There is also a peak to peak adjustment on one of the pots. We started to do the mods this afternoon, and then noticed that CBM in it's…
Joe; I plan to make the Mods tomorrow, there are a couple of other resistors, and one peak to peak adjustment that's also supposed to be needed. If you want, you could call me tomorrow afternoon (after 3:00 CST I should have it done by then).
Joe; I plan to make the Mods tomorrow, there are a couple of other resistors, and one peak to peak adjustment that's also supposed to be needed. If you want, you could call me tomorrow afternoon (after 3:00 CST I should have it done by then).
#67177-
IFF Troubles
Message #67220
These messages have been marked for reading with the RM Function
#67159-
Genlocking on BIG screen
Message #67219
Larry, No problem, but I would like to verify that they do indeed work before I toss it out there for the masses. Stan
Mike; Dos to Dos will fit the bill. Stan
Mike; Dos to Dos will fit the bill. Stan
Jeff Braun said they discovered it by accident. I have been using it for about a month now with no problems. Even though our requester seems to allow an unlimited amount of fonts, most others don't and too many crash programs. I just keep a stack of font disks and…
Jeff Braun said they discovered it by accident. I have been using it for about a month now with no problems. Even though our requester seems to allow an unlimited amount of fonts, most others don't and too many crash programs. I just keep a stack of font disks and…
#65561-
Color fonts
Message #65570
BTW, The fonts from the demo work just fine with Prism. You can avoid the hassles usually encountered with extra fonts, by naming a disk "FONTS", and put it in the external drive. It seems that DOS looks at the drives before the subdirectories!.
#65561-
Color fonts
Message #65570
BTW, The fonts from the demo work just fine with Prism. You can avoid the hassles usually encountered with extra fonts, by naming a disk "FONTS", and put it in the external drive. It seems that DOS looks at the drives before the subdirectories!.
#PRISM Ships!
Message #64009
Impulse, Inc. ( & me too!) is pleased to announce that ALL orders of Prism were shipped today to U.S. dealers, distrubutors, and users who had placed orders up to yesterday 4/16/87. European shipments will go out Next Tuesday. Even though I only ran 1 week behind schedule, I appreciate…
#PRISM Ships!
Message #64009
Impulse, Inc. ( & me too!) is pleased to announce that ALL orders of Prism were shipped today to U.S. dealers, distrubutors, and users who had placed orders up to yesterday 4/16/87. European shipments will go out Next Tuesday. Even though I only ran 1 week behind schedule, I appreciate…
#63914-
Royalty Fees
Message #63964
Mike; Actual net is what the mfr. or publisher actually gets for the product. the PC industry has been in such a confused state the last few years, from the retail point of view, that the days of big royalties are gone. for both authors and designers, unless they are…
#63914-
Royalty Fees
Message #63964
Mike; Actual net is what the mfr. or publisher actually gets for the product. the PC industry has been in such a confused state the last few years, from the retail point of view, that the days of big royalties are gone. for both authors and designers, unless they are…
#63626-
Macview2
Message #63637
Rocky; I've been using MacView2 suceefully for some time now. The problem is probably the Term program on the Mac Side. I initailly had the same problem, and found out I had to switch to a real 'generic' xmodem term program like "Freeterm v1.7 or greater, or Mouse Exchange Terminal…
#63626-
Macview2
Message #63637
Rocky; I've been using MacView2 suceefully for some time now. The problem is probably the Term program on the Mac Side. I initailly had the same problem, and found out I had to switch to a real 'generic' xmodem term program like "Freeterm v1.7 or greater, or Mouse Exchange Terminal…
Thanks, Don.
Don; Thanks! I posted as a request from Brian Niessen, If you catch him before I do, please let him know of the change. Thanks again, Stan
Get yourself a Genlock, and that should correct the problem
Donnie; They are ( as of today) up to Brain file #6.
Mike; I agree wholeheartedly! Of course if your're the "un-named company", you can save the money it would take to notify the user-base of the revision., especially if they just sent in $20 for a backup of the buggy one! Generally, if publishers, make changes along the way, which most…
Mark; I spoke to the folks at Octree a week and a half ago, and they are still on target for a May/June release of both the commercial, and consumer ($300 or less) versions of the Software. Stan Kalisher — Impulse, Inc.
Mark; I spoke to the folks at Octree a week and a half ago, and they are still on target for a May/June release of both the commercial, and consumer ($300 or less) versions of the Software. Stan Kalisher — Impulse, Inc.
Mike; I think you will be surprised and pleased!. I've been fooling with it most of the day, designing fonts to include in the release "Prism" disk. Integrating it in Prism, was just simple.
Portal Help
Message #52272
As soon as I get confirmation from Don that the as copy made it in time for publication.
Bela Notice the name change? Keep an eye open for ads soon to appear with that name attached. –Stan
Bri; I'll give you a call on Monday. There have been some new developments, and interesting changes.
#Portal Help
Message #51828
I realize this might be a "Yo-Yo" question, but how in the hell do you get in to portal? Each data bank is either in-operative, or keeps giving the same information with no update. Homer seems inoperative! Hmm… It looks like an interesting program, if you can get started! Stan
Bri, I've had that happen too, but usually after I make sure that all the wells are filled and the unit sits, for 1/2 hour or so it seems to be OK. I still haven't decided about CES yet. I really only have time for 1 or 2 days, Some…
#Pkg???
Message #46639
Bri; I verified with Fed-Ex yesterday that the pkg did get to BC OK. If you haven't gotten it you might want to check with customs, or try moving to the U.S. (grin) ==Stan
You might want to check out the "Citizen" premier P-35. SK
Larry; I was contacted by a west coast developer who claimed he had one and was going to send it to me for testing, but I haven't seen it yet. I'll post the ting if it shows up. Stan
Steve; M'thinks you might be missing the point here someplace. with IFF format you can specify the proper channel the instrument uses. Music Studio doesn't count yet because they haven't released their IFF utility. But using IFF instruments which have designated channels, you can get stereo. I also have a…
Steve; M'thinks you might be missing the point here someplace. with IFF format you can specify the proper channel the instrument uses. Music Studio doesn't count yet because they haven't released their IFF utility. But using IFF instruments which have designated channels, you can get stereo. I also have a…
#44529-
#Music Studio/IFF
Message #44850
Actually you should get the new De Music from EA. It's quite nice, and apart from a couple of bugs on the MIDI-IN module, it seems quite solid. There is also a PD utility floating around called "MS2SMUS" which converts Music Studio Files to SMUS format which Deluxe Music can…
#44529-
#Music Studio/IFF
Message #44850
Actually you should get the new De Music from EA. It's quite nice, and apart from a couple of bugs on the MIDI-IN module, it seems quite solid. There is also a PD utility floating around called "MS2SMUS" which converts Music Studio Files to SMUS format which Deluxe Music can…
#Music Studio/IFF
Message #44523
Nick; Just to let you know where you are calling, we are in Minneapolis, and not Milwaukee! The weather is much worse in Wisconsin Stan Kalisher – Genesys Technologies Sysop — M.A.S.S. BBS (612) 535-0568
#Music Studio/IFF
Message #44523
Nick; Just to let you know where you are calling, we are in Minneapolis, and not Milwaukee! The weather is much worse in Wisconsin Stan Kalisher – Genesys Technologies Sysop — M.A.S.S. BBS (612) 535-0568
Mike; It'll go out tomorrow. Stan Kalisher – Genesys Technologies
#PRO Video Upgrade
Message #43946
For all those who have purchased Pro-Video CGI, I will be mailing out UPGRADE disks to dealers tomorrow. The upgrade allows the use of external disk drive if you have expanded memory, and a minor fix regarding saves and Genlock. Please contact your dealer, or mail your original program disk…
Page 1 of 6