This is an archive of CompuServe forum messages from 1985 to 1995, as saved in transcripts by John Foust.
Search Results (170 messages)
Thanks for the info. I am looking for the best output and the best way to go at it and needed some feed back. Thank again!
#Video presentation
Message #31413
I have a 2000 and would like to capture 2D images convert them into a 3D object so I can rotate, zoom in and move around the object and place it on a video to playback for others. I know I will need to accelerate my 2000 and would like…
Will I have to upgrade Janus? to run on the 4000? Robert
#Brideboard
Message #93254
will the new 4000/30 accept the current brigeboard that I am running on my 2000? Robert
IBM drive
Message #93251
I am looking for an IBM high density drive (3.5) that will fit in one of my 2000 bays to run my Brigeboard. Can anyone suggest a make and model that will fit perfectly in the 2000 3.5 bay? Robert
#upgrade
Message #47621
I currently, have PageStream 1.8 which I purchased from a friend sometime ago. I could not contact my friend since see had moved to England to have him write a letter that he did sell the program to me. How can I update to your latest version without paying full…
3.3 upgrade
Message #47618
I have not received any notice to upgrade my Prowrite to 3.3. What do I need to do to get the upgrade? Robert
Upgrade path
Message #30294
Hello James, I am a Prowrite user and have not seen any offer for an upgrade in the mail. Perhaps you can send me one or give me the details for the 3.3 upgrade. Robert
Ok, thanks! I will check it out. Robert
#Modem prob
Message #45291
When I call a certain BBS I log in ok, but, when I type a message I get "[@" between each letter I type. How can I set the modem so that it does not do this or is my modem bad. I am using Supra2400 and have tried the…
#Macdraw to Amiga again
Message #43139
Well folks, I tried almost every combination to convert MacDraw picture from MAXII with transfer2 program to no avail. Do I need a special extension or something when I do the transfer? I am using Macview to show the pictures on the Amiga side. Any help would be grateful. Robert
Thanks I will try that! {_
#MacDraw to Amiga
Message #43066
I need some help with this one. I have a few MacDraw files that I would like to convert over to the Amiga using MAXII Transfer 2 program. When I cli click on MacPaint it does not show any files only if I click on "none, and MacBinary. How can…
Ok, thanks for your time!
Can you tell me how you did it? can't seem to find the instruction in the files.
Well, I did a search and could not find any such file. Can you tell me what section it is in? Thanks for your help! Robert
Thanks alot, I wonder why that is. Does it start with a particular version motherboard or is it random? Anyway, going to look for the file. Robert
I went to a computer store the other day and was amazed that you could pick-up an IBM clone 386SX for around $500 buck and I an hearing more and more Amiga users selling their computer for an IBM clone. Perhaps CBM is trying to keep up with the market…
Fat Agnus output
Message #17279
I have a friend who has an Amiga 500 with 1meg and fat Agnus and a GVP harddrive setup with 2megs of RAM. For some reason he can only get 512K with the fat Agnus when he should get close to 1meg. He consulted a tech person who said that…
Thanks for the info. I will check to see if I have that version. Robert PS: I am using 6.03 Mac system
BB review?
Message #38847
I am thinking of getting the BB periodical and would like to know if I can get a sample (old issue) to review before I decide to subscribe. Can you supply me with an issue to review free? Robert
BB info
Message #38679
I am thinking of getting that periodical on the BridgeBoard, but would like to get a sample publication before I shell out any buck. Can any one assist me or will the company supply me with an old issue. Robert
Can't print with AMAXII
Message #38676
I am running the AMAXII with the Deskject 500 and can't seem to get it to work. I have the Crappler installed and the HP driver installed in the chooser panel with the LQ Imagewriter set in the Chooser section and I can't get a graphic print, just alot of…
AMAXII printing?
Message #15868
Well folks, I sure hope someone can help me on this one. I am using AMAXII with a Deskjet 500 Printer and I can't seem to get it to work properly, I get alot of garbage. I do have the HP driver and the LQ Imagewriter with the Crappler installed…
I checked the connections and re-booted it and it still blinked, so I attempted another re-boot and it no longer does it and I have not had any problems with it since. Thanks for the reply. Robert
What you are saying is that my keyboard is bad? if so, what could be wrong with it? Robert
I'm sure you are talking about AMAXII. Well the sound can be turned up on the mac side. Make sure you have it turned up all the way… Robert
#Blinking Cap light
Message #15681
After I bootup my Amiga and everything seems fine until I saw my Caps Lock light blinking on and off. Does anyone know what that means?
Convert from DCTV
Message #12082
Is there a program that will convert DCTV Picture to IFF or to what ever, so that I can view them?
The Maxiplan version I have is not Maxiplan III. I will try the stack anyway to see what happens. Thank you and everyone who has left their reply.
The plan program does not have an Icon and can be seen via CLI, but I think you know that. I will change the stack to see what happens.
The Icon does not have a default, it only has a tool type and the stack is a strange 4096. I guess this means I can't run it from my hard drive? Have you tried running the "plan" program only? If that works then all I need to do is…
#MaxiPlan on DH0:
Message #12196
I am having MaxiPlan run on my hard drive. Everytime (well almost) I attempt to run it via Icon it GURU's on me, with a sofware error. (error number is 00000003.0024E728) What ever this means? Anyway, I tried running it via CLI by typing RUN PLAN and it seems to…
I really am not sure what you mean. The board inside the Amiga is an ICD controller board. The board inside the extern (Cltd) are two boards, not sure if it is, I thin it is one of those that you mentioned. Robert I will open it up and see…
This what I have: An Amiga 1000 with a box on the right side that is connected to an external Cltd drive with 25 copper slots on the outside of the drive box (I think its Adaptec) I would like to connected it to my Amiga 2000 which has an…
I think My old Cltd is a ST with a controller to make it SCSI. If so than I can connected it to my new ICD controller that has a 25 for external hook-up of drive? This mean I must have a connector that is about 2 inch long 25…
#Old drive new controller
Message #4958
Can anyone tell me if I can hook-up my old Cltd drive connnected to Amiga 1000 to an Amiga 2000 with a ICD controlller card? Robert
If that is the number to their latest software then it must be correct. Thanks!
Thanks Tom Robert
Hope someone can give me more information on the IBM third party that you mentioned..The Amiga 2000 keyboard sound like a possible way to go… Robert
My Amiga dealer does not carry Amiga 1000 keyboards. Robert
#A1000 keyboard
Message #118258
I am looking for an Amiga 1000 keyboard to replace my existing one that does not work so well. Can anyone point me in the right direction? Thanks you Robert
2 AmazingComputing mags
Message #107802
Well I got my AmazingComputing today, in fact, I got to copies. Is there someone here that I can talk to to correct my problem? Don't need to copies but, sure would like to add my second issue to first to give me two years of AmazingComputing enjoyment. Can anyone…
#IBM and 3000
Message #105613
Does anyone know if the current BridgeBoard (8088) work with the Amiga 3000? Robert
Thanks for the info. I saw it and it look solid all right. I think it has 8 bays 4 IBM type and 4 Amiga type.
How do I use protect on the "info" file? Thanks Robert
Freeze Icon
Message #33129
Is there anyway to freeze an Icon so that it can't be moved or relocated? Robert
32 bit and 8 bit images
Message #33079
I read in the Byte magazine (April) that the Amiga 3000 does not have the capability to produce 32 bit and 8 bit images. The author said that this is something it is lacking and that IBM and have this soon and that MAC already has it. What does this…
2000 Tower
Message #103028
I heard there is a tower for the Amiga 2000. Can anyone tell me who the dealer or the distributor is. I tried call Microprose in Chicago but there was no listing…Does someone have the number? Robert
Ok, thanks, I forgot to use the df30: with colon, that should work. Robert
Page 1 of 4