This is an archive of CompuServe forum messages from 1985 to 1995, as saved in transcripts by John Foust.
Search Results (148 messages)
XAOS-IFL problem
Message #190437
Hi, Does somebody have a solution for the following problem : When i try to create a transitions/effect with XAOS/Pennello i have to go all the way……………….., because XAOS probably can not acces a IFL file. I would be very thankfull to get a solution for this. Thanx in advance…
Ooops end of dither…
Message #169066
Mark, Yes i can, but time…time..time.., days need to have 48 houres to get my stuff done. Thanx anyway CIAO Theo
#Ooops end of dither…
Message #167988
Brian, I followed your instructions of the SCREENGRAB. But when i want to save to GIF or BMP 256, it returns the message Ooops , went after the end of dither buffer…………. and the systems crashes. Did i forget a BUGFIX ?! Thanx Theo
Brian, Gracias, like always, you are very helpfull. Excuse me, i missed this part in the manual. Theo
David, Muchos gracias for your info. Theo
#ScreenGrab/Capture 3ds
Message #167579
Hi, Does anyone know about a screencapture/grabber program which works within 3DStudio. I tried several grabbers but they get lost within 3DS. Often i want to save my settings in XAOS/Pennelo and other IPAS-routines etc… for future reference. And a screengrab would be very helpfull. Thanx in advance Theo
Reza, It is build round Illuminatus-2 which is WINDOWS based. Theo
#IPAS DEMO CD-ROM
Message #167015
Hi, We are planning to bring CD-ROM's on the European Market with examples of IPAS-routines and info about the vendors of this products. If you are interested to put your stuff on these CD-ROM's contact me or send your FLC or FLI's to. ADSOFT BV Postbus 23 1243 ZG 's-Gravenland…
Authoring Software Help.
Message #166597
Wolly, Thanx for your reply. I will check this out. Bye Theo
#Authoring Software Help.
Message #164513
Hi, Up and running now with 3Dstudio-DPS-PAR-IPAS-RAZOR-CD-RECORDABLE-ETC…., we are now looking for a good authoring package to produce interactive programs. Until now we tested Authorware Professional, and Illuminatus 2.1 Authorware Pro is a nice package but very expensive HFl 20.000,= (US$ 13.500) and Illuminatus is cheap, very userfriendly but… only…
QT-MOV-Maker
Message #161884
Please be so kind to inform me how i can get your product(s) and what the pricing is ! Thanx Theo
Jeffrey, Maybe not only this morning, probably also a part of the afternoon. I have two 1.6 GB MicroPolis drives and i takes > 6 houres. Transfer from the PAR through the DOS-box is slow ! Be patient Theo
Jeffrey, I use a Colorado PowerTape 4 GB SCSI-2 and no problem since 1.5 Directly from PAR to TAPE and vice-versa. Compression is always set to NO, because it takes much more time and it hardly can compres anything, to make sure… use the verifyoption a few times. GoodLuck Theo
Donald, At your service…, Theo
PMJI, I have experienced a simular problems several times before, although i don't think it has anything to do with keeping E/E on. I captured 500 frames 12-240 setting (PAL-version) Disk Occupied 800 MB Avail 800 MB After the 500 frames, it told me the largest blksize was 120 (?!?)…
PMJI, I'm also waiting for your answer where i have to wire the money to get these IPAS-PAR stuff. Where are based in PAL-country Holland so i hope this is no problem for the IPAS Thanx and CIAO FOR NOW Theo
Christophe, If you render range 155–>END , it starts reading XXXX0155 from your PAR so you don't have to change the IFL-file, also starting with 0 you can force within the DPSPAR.PXP to start at any point you want (last frame counter). And , just for your info there where/are…
Hi Brick, And maybe also a little bit for me. But can you get into the problem that sometimes the PAR.EXE comes up with the PAR-project directories in the DOS-window. And my compliments for the new join,…. fast..faster..fastest, and you know i had everything saved on disk
Christophe, I backup and restore straight to my Colorado PowerTape 4GB, with the standard software, and never had any problem (except the now solved >896 problem). Bye Theo
Christophe, I thought the same, but doing a warm boot the same thing happened again also sometimes the PAR-directories appear in the DOS-window. Bye Theo
Hi, I don't think so, because PAL and NTSC in integrated now into the same package. And….. more strange things are happening (it think it has to do with the Memory Manager), all kinds of strange messages appear in the PAR.EXE – window… and sometimes it put the PAR-directories in…
Greg, I also just installed the 1.50 version. until now i found only one bug in it when you try to put the playback in slowmotion, the program comes up with a message filesize = xxxxxxxkb, right over the FPS, so you can't read your FPS-setting anymore. It still didn't…
Alexander, Tax in Holland 72%, in Zug 5,75 %. Reasons enough i think. And we were working together with EDV-Zurich on a project to put MAI's Basic Operatin System over to IBM, that's why. But you really are living in a beautifull country…. and when the flood is coming i…
#New Vibrant for Viper ?
Message #153762
Hi, Yesterday, i installed a new Diamond Viper VideoPro card, although the salesguys told me that all the recent drivers for 3DSr3 and 4 where available, they were not. Can somebody lead me the way to find them somewhere here ?? Thanx Theo
Alexander, It your own problem, Greg promised me to deliver one personal in Holland for this price (ok including 1 visit to the Red Light district) but still. And i lived 2 year in Zug and never found this district over there ?! Bye Theo
Greg, Maybe because we discoverd America Bye Theo
3DS to PAR Problem ?
Message #152715
All, I encountered the following problem : Because i still didn't get the upgrade to 3DStudio R4 we have the problem of the >999 entries in the IFL-file. We have a animation on the PAR from > 14000 frames. because it was to big to fit on the PAR-drive and…
Jack, Yes,Yes,Yes, you are right. I had to buy Premiere because i couldn't get the RazorPro delivered before a deadline. But now i have it up and running both. Somebody want to buy Adobe Premiere ? And sure, we all know support is the keything, and thats were In:Sync is…
James, I did this several times, and i know the problems. I have two videorecorders a Goldstar and a Mitshubishi, the Goldstar has the possibility to adjust several things before sending them out to the monitor, so i use the Goldstar to feed my Mitshubishi, and it worked fine for…
#150813-
Fractal Painter & PAR
Message #151436
Thanx Jeffrey, I jump in, and look around there. Theo
PMJI, I ordered already two times XAOS Pennelo, it seems that the people don't want to ship their products to Holland or ???. I never received anything, left several message here in this forum, no reaction at all… So maybe i try to get Fractal Design Painter. Can somebody tell…
3DStudio Demodisk to PAR
Message #149146
((This message was posted before, but no answer was received, maybe the question was to stupid or there is no solutions. Please Let me KNOW)) Hi, Our clients are around 120 advertising agencies and studios in Europe. We try to convince them of the possibilities of 3DStudio, for this reason…
3DStudio DemoDisk to PAR
Message #148716
Hi, Our clients are around 120 advertising agencies and studios in Europe. We try to convince them of the possibilities of 3DStudio, for this reason we created a demotape. October last year we received a very nice demodiskette of AUTODESK 3DStudio we want to integrate this demo on the tape.…
Jamie, Yes, the SSN-problem is solved. Maybe you can shine your light on the following problems ? I can not acces my slave-PAR-drive… When i try to play a ANI-files from the PAR which are > 10000 frames or so WINDOWS hangs. Thanx in advance Theo
ThanX JKJ, Yes, i can use now the RAZORplayer and it is cool. Still suffering from the SSN which is still not excepted by the system, but i must tell you that Jamie is the most helpfull guy and…. quick response also. And when you have you ears on the…
XAOS TOOLS Delivery ?
Message #147774
Hi, You frustrate me by sending me info about XAOS-Tools Pennello etc.. Two months ago i ordered this softwarepackage, but until today i didn't receive anything. Please be so kind to look in to this ! Thanx Theo
Hi Jamie, Thanx for your reply. I'm pretty sure that the lines are correct in the AUTOEXEC.BAT file. And i'm 100% sure that I typed the SSN-number correct and in capitals. I will check everything again tonight to make sure. CIAO FOR NOW Theo
Thanx JKJ, I found out that the chip for RAZORPRO is integrated on the PAL-version of the board . The rest i will check again with the IN:SYNC people. CIAO FOR NOW Theo
RAZORPRO PAL PROBLEMS
Message #147530
Hi Last week i received RazorPro, We are based in Holland so we work with PAL. I have the following BIG problems when i tried to install the software. A. When I try to access the PAR-drive, i got the message …………. "cannot locate DPS_PAR PAL . HEX…………….." (even when…
David, Yes, i will do that. Have a nice christmas Theo
PAR Backup !!!!
Message #143280
Hi, The system i used for testing (again) the PAR backup/restore problem : Pentium P90, Memory 64 MB, Disks 1 GB SCSI-2 (C:), 1 GB SCSI-2 (D:) 3.9 GB SCSI-2 (E: and F:) , Apatec AHA-1540C/1542C Bios v1.01, PAR Master Micropolis 2217A (G:) 1626,34 MB, DMA Support YES (EISA), Serial…
Don, See the messages i have send to several people and also to the DPS-BBS-board. I spent more than 200 houres in testing this problem. I'm sure i pointed them in the right direction. Theo
Thanx for your reply, i want to upgrade !!!!!!….. but it is easier to talk to the queen here in Holland than to get an upgrade. But i will keep on trying CIAO FOR NOW Theo
#PAR or 3DS problem ?
Message #142818
Hi, I agree with you all that the backup problem is eating us , but i don't agree with others on this forum that DPS isn't helpfull. The sysop of their BBS is very helpfull… In the meantime i installed a slave-par-drive and before backing up is split everything in…
John, I understood from the DPS-people that they have been able to duplicate/simulate the 896-frame/restore-problem on their own system and the softwarepeople are working on it. There will be a solution soon Sorry to jump in this way, but i thought you would like to know CIAO FOR NOW Theo
Cal, I installed the latest 1.33B PAL-version, i downloaded this version last week from the DPS bulletin board. It solved for me the problems of the PAR getting corrupted after optimise and deleting projects which were in the earlier release. But the problem that came with this new version (no…
Don, I ordered RAZOR PRO this week, because with Premiere 1.1A i could not write to the PAR. But everybody tells me that this must be possible also with Premiere 1.1A. I can not find the way to do this however. Somebody here told me "just choose the PAR-drive for…
Gregory, I really think that the problem of the backup/restore is already on the PAR. and the only additional problem that backup/restore brings us is that all frames get corrupted after this frame. Sometimes you can find the "strange looking" frame within thef animation and removing this frame solves the…
Jamie, Thanx, i already ordered Razor Pro with the DPS-people in the UK. Hope i will get it soon ?!? CIAO FOR NOW Theo
RazorPro in Holland
Message #140026
Jamie, Thanx for your message #139151. But please can you give me the faxnumber where i can reache Clive. The 8-houres timedifference makes it a little difficult to get in contact with Clive. Thanx in advance Theo
Page 1 of 3