This is an archive of CompuServe forum messages from 1985 to 1995, as saved in transcripts by John Foust.
Search Results (168 messages)
multiuser file sys
Message #183382
I am looking for a new version of MULTIUSERFILESYSTEM. Any help in locating this program with the docs would be appreciated. . // JOHN LOWERY FLYING ON . \X/ The Lost Southerner!!! AUTOPILOT
.IFF TO .RAW
Message #34628
Well, I am looking for a utility that will convert .IFF files to those ending in .RAW files. Any and all help is appreciated. . // JOHN LOWERY FLYING ON . \X/ The Lost Southerner!!! AUTOPILOT
thanks for the info. I guess I'll have to get LHA138. I have never had a problem with LZH192 un-compressing any LHA files before. . // JOHN LOWERY FLYING ON . \X/ The Lost Southerner!!! AUTOPILOT
Well, 1st of all you MUST remove the old 1 meg. It is a different type memory and since it is in the 1st slots, will determain the type memory used. The best thing for you to do is remove the old memory and put the new memory in its…
#corrupt file
Message #103472
To whom it may concern. I am haveing a problem with one of the files here in that it tells me that the archive is corrupt. The file name is Multip.lha and it is in the printer utilities area. I thought it was just this copy, so I dl it…
DUAL SERIAL BOARD
Message #47946
To whom it may concern: I just got your Dual Serial Board for the Amiga. I use Ami-Express BBS and with the SIOSBX.DEVICE running the BBS, I get lots of CDC errors and slow transfeer rates. When I change back to what was the old C= serial.device (now cbmser.device), everything…
FOR SALE
Message #78907
FOR SALE – MUST SELL – PRICES NEGOTIABLE A2000 COMPUTER WITH LATEST REV. MOTHER BOARD AND ECS CHIP SET BOMAC TOWER FOR THE A2000 ADDITIONAL POWER SUPPLY FOR THE BOMAC TOWER GVP 68030/40 MHZ /4MEGS ACCELERATOR 2 ADDITIONAL 4 MEG SIMS FOR THE ACCELERATOR C= FLICKER FIXER CDTV UNIT CDTV…
Ron, Then drives I have are the same ones that are in the A4000's. As for the problems with them, that is a long story – one quite a few of us belive is part truth and part lie from C=. They have a problem with their Software. They blame…
Don, Why lock the modems to V32? If they are duals, let them do their job. It doesn't cost CIS anything to let them work both ways. . // JOHN LOWERY FLYING ON . \X/ The Lost Southerner!!! AUTOPILOT
Michael, Right now the loaner I have is just the plain HST. The dual is my Xmas present this year. Sounds like CIS needs to get some Duals also so they can keep up with the rest of the world. (Of course, GEnie could use a loooot of catching up…
#us robitocs modem
Message #76190
I have just aquired a US ROBOTICS HST 14400 baud modem and am haveing trouble getting it to work with AUTOPILOT. Would anyone who is using this modem here send me the initilization string and the ATI4 setting. Thankyou in advance. . // JOHN LOWERY FLYING ON . \X/ The…
ROBERT try ARMADILLO BRTHS in SLC (801) 484-2791. They had several used monitors in the 1080 and 1084 models. . // JOHN LOWERY FLYING ON . \X/ The Lost Southerner!!! AUTOPILOT
Michael, The A3000 did ship with the HD floppys. That is how we all came to find out about them. The 2 I have are out of A3000's and A3000t's. They are not some off the shelf HD floppies. Others that I have checked out and repaired (cleaned good) were…
Michael, You arent kidding about the being confussing. When you do run Flipper, it takes a couple of minutes for the program to decide what disk you have inserted. It's a lot quicker to just set it to manual and DF0: and just change it when needed. As for the…
#BB Sale
Message #75447
Michael, Are you upgrading again to a 386 BB? If so, I have one and it is realy nice. 25 mgz, but it came with only 1 meg of ram. The type on the board will let you go to 2 megs. You have to change the 1 meg out…
#Mommy, what's a AMAX II+
Message #75446
Chris Tolmie, Don't forget one big thing. The C= HD drives will ONLY work in DF0: They are NOT supported in any other slot. I have tried OS 2.1 and am running 3.0 now and no go on eather. . // JOHN LOWERY FLYING ON . \X/ The Lost Southerner!!!…
Chris and others, I have used DMS for a long time with no problems. It is very fast and very effective for compressing complete disk at the time. As for the virus to the systems, well, I know a lot of people who use it all the time and with…
Nick, When I tell my dealer to order it, he needs a model number. We checked the latest cataloge and cant figure out one from the other other than one is over $1200. . // JOHN LOWERY FLYING ON . \X/ The Lost Southerner!!! AUTOPILOT
Mr SYSOP Michael Gerard. CONGRATS CONGRATS CONGRATS!!! YOU DESERVE IT!! No for your 1st chore – get AUTOPILOT on here for us!! JOHN – The Lost Southerner!!
BAD FILES AROUND
Message #67120
all I saw a message here the other day about some files that were being sent around. One of them was a DOPUS file and another. Could someone please look up the version numbers that saved that file. I think I have found a copy of them, but not sure.…
MICHAEL Gerard Did I read it right that your nephew is coming to UT?? (UTAH). If that is so, and he needs any help or anything, have him give me a call and mention your name. He can call my BBS (801) 576-1303. Check your EMAIL for the voice number.…
#OS 2.1 VS OS 3.0
Message #66489
Well, wouldn't you know it. I just talked to my dealer and was told that OS 2.1 might not even ship – that 3.0 is in Beta now and they might wait on it. He said that 2.1 wasn't going to be that big of an upgrade anyway, but 3.0…
Gracia Littauer Don't be jealous. I got my copy of CrossDos Plus from my dealer who asked me to try it out and report back to him on how easy it was to insatll and set up. I have Ambassador on order, so when the test was over, back to…
Don Kyte If you have LZ to de-compress your LZH files, it will work with LHA as well. Otherwise, the other answers I read will also work. JOHN – The Lost Southerner!!
GRACIA, The crossDos5 is shipping. I have a copy of it here. Just follow directions and if you want to run Cross-PC, go and get MS-DOS_5.0. You'll need it and so does the program. You'll also need a MS-DOS bootable disk to get things started. JOHN – The Lost Southerner!!
DAN BABCOCK AND OTHERS Thank you for the information on the CrossPC program installition. It seems that you can't name the Partition the same as the CrossPC trys to name the IBM part. Name the partition anything but PCC and all will work fine. Just remember to purchase DOS at…
Michel Beausejour Ambassador is due out the end of August or the 1st of Sept. JOHN – The Lost Southerner!!
Marion, I got it up and running. I was naming the partition PCC which was also trying to be a MSdos name. You have to name the partition something else when you set it up. MS-DOS FDISK will take it after that as well as the install HD option on…
Mark, You are correct. Mine were ordered from the service department catalog with the replacement number. The dealer here did get a couple in before C= put the stops to them. JOHN – The Lost Southerner!!
Cross-PC
Message #65203
Has anyone tried to set up a MS DOS partition on their Hard Drive for use with CROSS-PC? I have tried and tried and keep getting an DOSTYPE NOT MS-DOS. I have tried FDISK and it won't even recognize it at all. Anyone have the correct DosType for this problem????…
Mark, As a person who was lucky enough to get one when C= USA 1st announced them and I still have it, it was announced from C= USA and was listed for a while. I had 2 on order and the back order for the second was canciled by C=…
ac To answer your questions. The High Density drives have been pulled from the Dealers catalogues. There were a lot of problems with them and also according to C=, they got a bad batch from Chinnon. Personaly, I have the following ideas. C= was going to release them and did…
Kenny, Is there a way to check to see if the upgrade rom for my V32bis has been shipped. I know the reg. is there as I can check it from your BBS. Maybe add a note to that message when it is shipped or expected to ship. Anyway, another…
#autopilot
Message #42161
Michael, I forgot to ask. Does AutoPilot have a quoting feature in the program??? JOHN – The Lost Southerner!!
Dave Gray I had a problem at first then I remembered the progaram Whap1.9g was imployded. You didn't compress the program on Your disk or hard drive did you???? JOHN – The Lost Southerner!!
Len, There is no space in the init string. AT&F2. You said the second time. you got nothing. Not even a carrier from CIS??? JOHN – The Lost Southerner!!
Len, Go into the drawer where WHAP is and delete the T9600 file. Next, set the initilization string in Whap to AT&F2. Now log on and see what happens. If that still fails, let me know and I will try and dump the register settings to you. JOHN – The…
Len, I have a supraRAX .32bis and Whap 1.9H and run CIS flawless at 9600 baud. 1st , be sure you have a 9600 phone number. I use the initilization string of AT&F2M0S0=0. Next, go into your drawer where WHAP is located and find the file T9600. Delete this file.…
Chris Do you have a program your developing to submit with the fee. I was always under the impression that you had to have a program under developement or one you already developed to get that status. JOHN – The Lost Southerner!!
DON, That is what I thought. I wasnt sure how the other guy was going to get it for just 45.00 without any programs to submit with it. I didn't think they would just sell developers licenses for the money. JOHN – The Lost Southerner!!
Michael Riehle My dealer here in Salt Lake City has an A3000UX he is selling. It has been the store DEMO for a year or so I think. Might make you a good deal. Call Brent Gray at 801-484-2791 from 10a to 5p M-F. The store name is ARMADILLO BROTHERS.…
Chris Tolmie, Where did you get the form and information that it only took &75 to get a developers status??? Inquiring minds want to know!!!! JOHN – The Lost Southerner!!
Gracia, Yes, I have the supra 14400 bis FaxModem. For whap, like i said, delete the T9600 file and have whap set up things again. The startup string I use is probably different. It is AT&F2M0W2S0=0. AT&F2 set things back to the factory settings for the IBM and AMIGA. The…
Gracia, Go into your drawer where WHAP is and you will see some files at the bottom that have a T as the 1st letter (T9600, T2400) etc. Delete the one that says T9600 and then log on with whap. It will reset all your settings for 9600 operation and…
Gracia Littauer What town in NC??? I have a lot of friends there!! In NC that is. JOHN – The Lost Southerner!!
Brian, When you talk to C=, who's time do you think were talking???? I guess we'll see it at the show in CAL in a couple of months. JOHN – The Lost Southerner!!
Leslie, I visit the 4 amiga forums and the aviation roundtable so I guess that is 5 all together. By no means do I visit every section in each forum. It use to take about 15 min to do what I do at 2400 and now it takes around 5…
Leslie Bartiromo My bill has been cut by 1/3 and most all I do is read the messages with WHAP. It sure has saved me $$$$ JOHN – The Lost Southerner!!
BEN, Any idea of what version the software is. I'd like to be sure I got the ones that work. I use a Supra V32bis 14400 baud modem on a BBS and would like to add just one more so I could do my thing with everyone here without dumping…
Don, Your correct, however, I never set my modem to 300 baud. I always leave it set to the max – computer to modem 38400 and modem at 14400. When I connect, the other parts take over and eather slow down or accept what I set. JOHN – The Lost…
Page 1 of 4