This is an archive of CompuServe forum messages from 1985 to 1995, as saved in transcripts by John Foust.
Search Results (28 messages)
Help on installation
Message #87392
Eoir, Please note the posted apology in the forum. Sorry for the tardiness of this respnoce. Development for NT will depend on how the operating takes off. Netware 3.12 support as well as Netware 4.0 support should be ready near the end of December, beginning of January. I hope this…
Michael, If you have Pro, we have a download that will help. If you do not have Pro the download will not work. The file is NETPROF.EXE Password is SPRING @ 9600,8,n,1 (613)-728-4752 That should do it for ya. I hope it helps. Laszlo
Gerhard, CorelSCSI and SCSI Pro have NOT been certified with 3.12. We will have a release of software available at the end of December that supports 3.12 and 4.0. I hope thta this helps. Laszlo
Phil, I've a ton-o-info for ya! 1) Yes, Norton cache should still work. 2) Try running Windows with a /D:FSVX. If this helps, type WIN /? to see what the results are. 3) Devices do not use addresses only controllers. 4) Each SCSI bus is different therefore you can have…
Victor, I have seen this error if the Multimedia extensions are installed. If you have them installed, try un-installing them to see if that makes a difference. Laszlo
Jay, Just got off the phone with the engineer. To confirm, the "INSITE" floptical was not supported under 1.2b. The IOMEGA was. CoreSCSI version 2.0 does support the INSITE floptical. I would check with with our Customer Service section on upgrade policies since you only purchased 1 week ago. Laszlo
Jean-Hugues, The operating system tells us what the next available local drive letter is and we use it. There is no option to switch this using the drivers. You may want to look into the DOS SUBSTITUTE or ASSIGN commands to do this. I hope this helps. Laszlo
John, We have quite a bit of help here on CS . We have Draw, SCSI and Customer Service available. Just come on in to the right area and start firing! The patch program that ships with CorelSCSI will work on DOS 4+,5+,6+. Other than that I have a couple…
Andrew, The 2012, 2011, and CM 4000 controllers from DTC have been certified. This means that we know that they work with our software. This is not to say that the 2022 and 2122 controllers will not. If the cards have an ASPI manager and it is written to SPECIFICATION…
Rich, There is a lot of I/O occuring when an AUDIO CD is playing. This I/O takes up BUS time. You can expect bus delays. This is the way the SCSI specification was designed. A different controller may help a bit, but will not solve the problem entirely, I think.…
Mark, The problem is that something is pointing to an invalid mosaic. Enter the WIN.INI file and search for the section [CorelGraphics4]. Rem this out with semicolons at the front of the line. Save and exit the INI fiel and restart Windows. When it comes up, reinstall the PCD software.…
Det, Here are some common things to check. Maker sure that the DTC controller is not set to SYNC negotiation. The NEC drive will have a problem with this. The version 1.02f is rather old. You can update to the latest driver free of charge plus shipping. Just place a…
Mary, If you read the posted apology you will understand the tardiness of my response. If the DRIVE is a DAT, add the line "DRIVEMASK=0" to the end of the WTBACKUP.INI file. If the drive is a QIC, add the same line but use 175 or 174 instead of the…
Peter, If you read the posted apology you will understand the tardiness of my response. Try downloading the file NETPROF.EXE from our BBS at 613-728-4752 @ 9600,8,n,1. The password is 'spring'. If you do not have SCSI Pro this will not work. I hope this helps. Laszlo
Merv, If you read the posted apology you will understand the tardiness of my response. Sorry 'bout that. For future reference; CorelSCSI version 2.0 will support DOS, Windows, and OS/2 for (RW, MF, WORM, CD, TAPE, SCANNERs, PRINTERS and CD ROM RECORDERS.) Corel Network manager will support Netware for (RW,…
Jack, If you read the posted apology you will understand the tardiness of my response. I was talking with management for CS yesterday. They are taking order @ 1-800-836-7274. As for a unique identity, I finally have my own name and account. ….The dreaded paper trail slowed it down….Thanks for…
Dave, If you read the posted apology you will understand the tardiness of my response. Depending on the nature of the questions asked, the technical aspect msut be approached first. The customer service representatives have their hands full with marketing, upgrade and pricing duties and are reall not well suited…
Ronald, If you read the posted apology you will understand the tardiness of my response. Try downloading the file UNIV.EXE from our BBS 2 613-728-4752 @ 9600,8,n,1. The password is taxes. Some full CD ROMs may be a problem. Current shipping version have this fix. (SCSI Pro and 1.2b) I…
Robert, If you read the posted apology you will understand the tardiness of my response. The LS2000's bios or our drivers on their own can only support HD up to 1 GB! The driver can support > 1 GB if you split the drive into multiple volumes, and use the…
George, If you read the posted apology you will understand the tardiness of my response. The problem is common and is easily fixed. Just follow the steps below 1) Run Media Player (comes with Windows) 2) File/Open from the cd rom drive letter. 3) Move to the Midisoft subdirectory. 4)…
Lee, If you read the posted apology you will understand the tardiness of my response. We have seen this problem with SMC nics. Use the ODI, LSL driver to rectify the problem. We have also had a resolution sent to us by a client that states. 'I loaded a file…
Bill, If you read the posted apology you will understand the tardiness of my response. Just to add something to this that I forgot. The CorelSCSI Pro, or Network Manager (avail. end of December) software has a caching scheme that is ideally suited to the Pioneer '6-pack'. We utilize anywhere…
Piyush, If you read the posted apology you will understand the tardiness of my response. Make sure that the Adaptec bios and floppy controller are both disabled if you are not using them. I've seen an enabled bios cause this problem. I hope this helps. Laszlo
Liz, If you read the posted apology you will understand the tardiness of my response. Jack has definately helped us out here! Maybe he'll put down the pen and pick up a headset . Just kiddin' Jack….where would us SCI-FI readers be…. Laszlo
Marshall, If you read the posted apology you will understand the tardiness of my response. The 1542c had a termination problem associated with it. The problem would be more pronounced if the cable was sub-standard ( less than 90-132 Ohms impedance). This problem was found and rectified in there 1542c…
Dave, If you read the posted apology you will understand the tardiness of my response. If the driver is older than CorelSCSI version 1.01f you have no PCD support. If the version is 1.01f then you must add a /XA switch to the driver line. If the version is 1.1…
Adaptec, LF-7010, NW3.11
Message #87364
Larry, If you read the posted apology you will understand the tardiness of my response. The 1510 is probably not the best suggestion for your server. It also defaults to SYNC negotiation. I would swap the 1510 for the 1540. You should have no problem with this card. I currently…
Fabulous! Laszlo