This is an archive of CompuServe forum messages from 1985 to 1995, as saved in transcripts by John Foust.
Search Results (1,727 messages)
PVR USERS?
Message #197321
>>> In:Sync, makers of Razor Pro/Speed Razor Mach3. We just received the first ever shipped, retail version of Speed Razor and have been using/selling the PAR/PVR for years AND we also offer credit on PAR to PVR purchases.
>>> Has anyone had any luck obtaining the NT drivers for the Perception? I have been trying for two days with no luck. I have tried the DPS ftp site directly, going in through the In-Sync site and I have also tried the DPS BBS. I did manage to get…
>> Certainly you must agree that all stones weigh 14 pounds .
Greg…………… >>>> >> QEMM w/ 96 megs… I can Reload the old DOS 64MB Setup and it >> Plays Back Animations off the MAX Drive Just Fine… Have you tried keeping the identical installation but just removing all the memory above 64 megs? No software changes, etc. allowed! Don't cheat,…
Matrox Max 96MB Ram
Message #196604
This is addressed to Digimation but if anyone else has suggestions your welcome to jump in. Hi, David, I've run in to an interesting situation. I have a Client that has a Matrox Max System and we just upgraded him from 64MB to 96MB of Ram, of course because of…
I thought you may have been from the Green Bay Wisconsin Area as we have a Post Production Facility up the Street that is also called "Pulse" although I think it's actually "Pulse Communications". Murph'
Just a thought but if you have an internal modem you can unplug it and buy an external modem. Perhaps you've already done this. Murph'
Steve, Where are you located? We're in Green Bay, Wisconsin. Murph'
#Murph & Chris
Message #194240
Hi Chris. Murph'
>> they are MICRONGREEN not MICROGREEN.
>> try .microngreen. instead, noting additional n in the name….
Garry, I highly Reccommend that you contact AM Labs in Addison Texas: Call 1-214-960-7915 and tell them what you want, be sure and ask for Matthew C. Armstrong and tell him James Murphy told you to contact him. You won't be sorry. Murph'
Angela, I've tried to access your http://www.microgreen.com and when I do it gives me some other website that has High Schools and other items listed. Is there a problem with the access subdirectory? Murf@netnet.net
>> If any has or knows the location of airport related meshes (airplanes, terminals, vehicles, futuristic looking buildings, etc.) I would be very greatful. I anxiously await any responses. Thanks in advance.
Chevy.3ds, 640×480, Null output, Pixel size 1.1, Camera Viewport ASUS P120 Motherboard, 32 meg RAM Render Time 1:31 (91 seconds) for what it's worth. Murph'
>> I am looking for a source of trees & civil engineering objects (street lights, cars, etc) for use in 3-d models in 3d studio.
PMJI,…. > Kevin Gibson sitings? < Carful Bob…if you say that name two more times, he appears in your bathroom mirror….ala "CandyMan"… Murph'
>> Alex, Video International P.S. Sorry, I miscalculated your age, but your messages sounded so familiar (like young Lenin works). You were so short from stating: "poor users, be aware, that these greedy developers exploiting your lack of knowledge … etc " (see V.I.Lenin, volume 2, letter to Plekhanov)
Terry your copy of Key Factory is Registered with Schreiber and you will automaticly receive the final shipping version which is now at the printers. Murph'
#VRML and 3DS
Message #188428
Hey Angela! I've been wondering what ever happened to that upgrade I was suppose to get? Also we never got the Windows Version. We should still be in your database. James Murphy Consulting?
Murphy's Conference
Message #184688
Jeff, Where you planning on Attending our Conference Monday August 14th and possibly the Digital Artists portions on the following 2 days? Murph'
Angela, I've been trying to get in touch with you. Our August 14th, 15th and 16th Seminars is upon us and we never received the windows version on the NAVFlyer plus I wanted to talk to you about doinging something for a show and tell on your stuff….too late now…
Since I've avoided doing any "Real Math" for 33 Years I'm going out on a limb here with an aspect ratio of 0.8888665 for the PVR 720 x 480 resolution. Is that correct? Murph'
#Proper PVR Aspect #
Message #182803
Hi All, Does anyone happen to know the ___"Proper"___Aspect Ratio for Rendered Targa Files for the New PVR? I was Told 0.93 But that doesn't seem Mathmaticly Correct. I know the Resolution is 720 x 480 I'm just not sure about the Proper Aspect Ratio. Thank you All in Advance.…
David, >> The daughter card seems to fit well enough where I believe the screw and spacer isn't necessary. It would seem to be a strange discrepancy with the instruction manual, however.
Thanks Anne, I hope Rick Can help someone out with this system. Since he's signed up to work the Mid-East for 3 years it'll do him little good in storage. Just think what we'll all be talking about in 3 Years! That's 6 3D Studio Animator Lifetimes! Murph'
>> Absolute bargain. If I had the cash I'd buy the system. Sure he isn't missing a "1" in front of the "7"
#Hardware Sale By Cleint
Message #181913
Hello All: I've got a Freind who works for McDonnell Douglas Corporation that has just accepted a 3 year overseas assignment and will be leaving the U.S. Since he does not have a CompuServe account I've Volenteered to post the following message for him. I'd also like to say that…
#Hardware Sale By Cleint
Message #181913
Hello All: I've got a Freind who works for McDonnell Douglas Corporation that has just accepted a 3 year overseas assignment and will be leaving the U.S. Since he does not have a CompuServe account I've Volenteered to post the following message for him. I'd also like to say that…
I knew I forgot to do somethin'..now where's that sandpaper…. Murph'
I was hope N' for a lengthy but impressive List…Uh…Oh Ya'… isn't Autodesk supposed to have a PR Department?.. Murph'
Peter, I try not to assume anything anymore when it comes to this industry but I did beleive that either you were talking to someone be it a Canadian DPS or US version of it, that was either not fully informed or possibly misunderstood what it was you were asking…
>> You sneaky weasels!
>> Actually he stated just the opposite. At least the way I read it. Regardless, this is welcome news and glad to see you guys on top of it. Now is that service or what?
3DS Productions
Message #181767
Howdy Everyone! I'm putting together a profile on the current state of 3D Studio Productions Past and Present. I know that James Coulter once posted a partial list of programs/films etc that used 3D Studio in parts of their production and I'm aware of Johnny Mnemonic and now I beleive…
Peter, I've reposted your concerns along with mine and Faxed them to DPS. I would assume that they won't be able to see it until sometime Monday so by Monday Evening we should all be enlightened. Murph'
When mine came back….it worked great and continues to work great. I didn't get a new machine like one of my other clients but as far as I Know of the 9 Sanyo's I sold/new about these were the only 3 I had heard had any trouble. Murph'
Peter, >> As for the problem you mentioned about skipped frames DPS assured me there would be no "patches" or bug fixes for the Win 3.1 version.
Marc, Well, I was a dealer for Sanyo and can tell you that I can sympathize with Pauls problems regarding the Sanyo GVR-S950…our Dealerships unit worked Great when we first got it in but after a while it developed a "Tearing" Problem laying down single frame animations. I was lucky…
>> We are a game development company looking for 3D Artists. Is anyone interested?
Bob, "We were all Hidding from You"… Murph'
Steve, Where are you located? We are an Autodesk Stocking Dealer for all MM Products and of course can also send you the CD. You should contact Autodesk by Calling 800-525-2763 to find a dealer nearest you…however if you happen to be in the Green Bay Wisconsin Area We'd be…
>> Sounds like a good setup.
PMJI Brian, >> That means that one station probably won't be able to run 3DS while you are network rendering. (Of course, it doesn't have to be a powerful station. That one could be an old 386/486 that you have.) But if you want ti use WFW for other things…
Why not just purchase Humanoid? It has all the Linked Hands you need! Cheap too! Sug. Ret. is $195. Ask Around. Murph'
> Tonite's meeting will be "the Collision Detection Shoot-Out" twixt Dynamic >> Motion Module and Keyscript. PMJI, But I hope your using the "Latest" Version(s) of _Both_ of these programs… You may want to check. Murph'
Good Luck With Ron!, He's always been straight with me so I see no reason to doubt anything he's had to tell me. Keep me posted. Murph'
Carl, >> I want to use the scanner to bring in color photo's, 33mm and etc.,> for photoshop and 3d studio mapping.> Speed is not a issue.
Let me know what they tell you, If you need to contact anyone at WACOM Directly I'd go directly to Ron Wilson, His Phone is at 1-800-922-6613 extension 136. That ought to get his attention if your particular about details. Especially if Sales People had promised you things in the…
Page 1 of 35