This is an archive of CompuServe forum messages from 1985 to 1995, as saved in transcripts by John Foust.
Search Results (26 messages)
Hi Erich, >Downloading a file of 1 MByte data will last, and last, and … ;-)) Yes! But writing the same file by hand will laaaaaast and laaaaaast and … Ernst >=====on AutoPilot_1.80 [what else?] for AMIGA—–> from Europe/Austria/Vienna
Hi Bob, >Your suggestion appears to be elegance in simplicity. ..and if it works … Ernst >=====on AutoPilot_1.80 [what else?] for AMIGA—–> from Europe/Austria/Vienna
And off I creep under my stone again. (didn't knew the newer prog, the old one worked!) Ernst >=====on AutoPilot_1.80 [what else?] for AMIGA—–> from Europe/Austria/Vienna
No elegant solution but it works: insert a line wait 1 at the top of your user-startup. This causes the system to wait a second. If that isn't enough you have to try with wait 2 and so on. cu Ernst >=====on AutoPilot_1.80 [what else?] for AMIGA—–> from Europe/Austria/Vienna
Hi Peter, Try out OBTAIN.LHA which can be found in AMIGAVEND (Section AutoPilot of course ) Unpack it and follow the instructions of NewObtainGIRPort.doc, which can be found in there. Perhaps it works. Good luck. 😉 Ernst >=====on AutoPilot_1.80 [what else?] for AMIGA—–> from Europe/Austria/Vienna
Hi Danny, Greetings from the Continent to Surrey! It was a pleasure to help you! If another question occurs, just yell! Ernst >=====on AutoPilot_1.80 [what else?] for AMIGA—–> from Europe/Austria/Vienna
Hi Rafael, >Aha!!! I'm not the only one! No! there is a growing crowd of people, which have their difficulties wich going online! Ernst >=====on AutoPilot_1.80 [what else?] for AMIGA—–> from Europe/Austria/Vienna
Hi Rafael, >If the line were too busy, the CI$ modem should refuse the call (i.e. you should get a "BUSY" answer). Otherwise, you are charged for a useless call!!! Thats the theory! I agree! But (the last days are better now) it was usual, that you could hear a…
Hi Hank, >no changes to 28.8k areplanned for my access line in the near future.!? Same game as in Vienna, Austria, where my node is situated. They told us, that they will not change to 14.400 till the end of the year. Now we have 14.400 and sometimes we can…
Hank, I agree! but if your phonecompany tells you, that the line is o.k. go and tell CIS! Perhaps there is a ruined modem, causing your problem or something else. Perhaps they are switching to 28.800 and this could cause a problem too. cu Ernst >=====on AutoPilot_1.80 [what else?] for…
Hi Hank, > I tried to log onto Cis with AP and had to redial 4 times before getting a connection. The connection was at 12k (usually 14.4k). My AP setup is at 14.4 for the first phone number, and I have the other numbers set at inactive I know,…
Hi David, It might be, that you are using an old LHA (or anything else) Try the LHA138.RUN file of this forum (sec. 14, I suppose). It is selfextracting. With this LHA version you should have no problems cu Ernst >=====on AutoPilot_1.80 [what else?] for AMIGA—–> from Europe/Austria/Vienna
Hi Tony, Probably *NOT* because CIS only sends PC software. But if your friend has a terminal-program, he should set it to: RTS/CTS on 8 Bits 1 Stopbit no parity And the same should be set in the serial prefs of the Amiga. Then he can go online with the…
Hi John, >I haven't received it yet.. 🙁 >Are you close to the Swiss Alps ? Well the Swiss Alps are the western part of the Alps; the Austrian Alps are the eastern part. And you can use both pretty good for skiing Please give snail mail another few days…
Hi Christiane, First of all, the safest way to get out is: first make a backup (Don't make it, if you want to gamble ) Then you can download Disksalv (DSALV.LHA in this forum), unpack it and let it run over your harddrive. I never had a harddrive-problem, which couldn't…
#Help with Kickstart
Message #208239
John, I got one of the last A 4000/040. But I went the whole way with C=. From an VC 20, the 64 the A500, the 1000 the 2000 and now at last the 4000. They are not selling Amigas (as far as I know) now, but with the beginning…
Hi Betty, > We've also read here .. And although it's not Windows 95, we can trust in that date Ernst >=====on AutoPilot_1.80 [what else?] for AMIGA—–> from Europe/Austria/Vienna
Hi Betty, It's just another rumor (I fear) but here in Europe it's said, that ESCOM will ship the first units in Sept.95. This message I got from one of the few shops, which never thought to give up their business with Amigas. cu Ernst >=====on AutoPilot_1.80 [what else?] for…
Hi Terry, > I've found the problem! … Oh great that you are on AmiTCP/IP now! Hope you have fun in Internet, here in CIS and last but not least with your Amiga! cu Ernst >=====on AutoPilot_1.80 [what else?] for AMIGA—–> from Europe/Austria/Vienna
Hi mi, > LHA copy lha130.exe ram: CD RAM: lha130.exe and it will selfexpand copy LHA c: LHA ? for the helpscreen of that prog. Servus, Ernst >=====on AutoPilot_1.80 [what else?] for AMIGA—–> from Europe/Austria/Vienna
Hi Ron, Thank you ! Ernst >=====on AutoPilot_1.80 [what else?] for AMIGA—–> from Europe/Austria/Vienna
#47412-
#Supra modem probs fax
Message #47413
Hi Ron > The Amiga serial port is identical to the IBM port, but in order to handle > certain jobs like distinctive ringing the modem needs the special cable. This can be the simple clue! I bought the modem in an "IBM pc-package" and the cable could be different.…
Betty, >do you have the FAX software for the Amiga Yes I have tried several software (AmigaFAX, TRAPFAX etc.) nothing will work! 🙁 The modem dials the number, the FAX of my office is there, but they can't understand each other with the result of NO CARRIER ! If I…
#Supra modem probs fax
Message #47377
Can anyone tell me, if there is a difference between an Amiga 4000 RS232 (Modem) and an IBM (compatible) RS232 ??? My SupraFAXmodem V.32bis can send Faxes from my notbook but not from the Amiga !!! Please help me Ernst >=====on AutoPilot_1.80 [what else?] for AMIGA—–> from Europe/Austria/Vienna
MAC Quicktime for AMIGA?
Message #180409
Please help me, Is there an Amiga-Viewer for Mac. QT (Quicktime) pictures or animations. Or a program which would convert these files ???? TIA Ernst >=====on AutoPilot1.74 for AMIGA—–> from Europe/Austria/Vienna
Hello
Message #84
Good luck to all! Ernst >=====on AutoPilot1.74 for AMIGA—–> from Europe/Austria/Vienna