This is an archive of CompuServe forum messages from 1985 to 1995, as saved in transcripts by John Foust.
Search Results (188 messages)
Well now I'm getting kind of scared off! (this is also a $50 deal, and I was under the impression that they were SUPPORTING the Picasso- you think they would for $50, wouldn't ya?) I had a big crash recently and not having a backup, didn't remember which Pic driver…
Hmmmm..What version of the Cyber sw were you using? Are you using WB3.1 or 2.x? Thanks for the info! One of the reasons I was excited about getting the sw for the picasso (since the author of the orig. pic. sw is writing this)was that I could take advantage of…
The North American version of Photogenics supports toaster ..load/save framestore.. quite good! There's a bit of confusion as to WHO'S selling the NA version.. I bought my first one at a dealer who will remain nameless and bought the CORRECT version for a bit more from the Friendly/Knowledgeable folks at…
I just reloaded FW4 and am getting weird responses..hmmmmmm
Mike Nope, no monitor- not sure about revision numbers- just keyboard and mouse- good machine to put accelerator in, or toaster, or…. I got it when I thought I'd have to spend $ for a new motherboard-then I started to use it as my second machine- recently got a 3000T…
#A3000 DEAL
Message #208505
For Sale= 16mhz 3000 – 2M chip 4M fast- 50MHd- nice little machine! $500 send email Mike
Erik,what 133 are you getting? I've been trying to decide what to do- I'm pretty interested in the DPS Perception system which need full length PCI slots- lots of clones fail the test. I'd be curious to know what you've decided – thanks Mike
Is that the 'Toaster-in-a-3000' purple?
I would love to see a pic of him- He sounds great- I'm excited again!! Thanks Mike
Yeah- So how is this new xbox? How's the new PAR? How's Trinity? What was really great? Thanks! Mike
Paul- did yu get the 40/40 for a 3000? How is it? What kind of speed increase? Appreciate it.
Is this an '040 or '030? I'll offer 1275 – (Provided the machine is in Mint electrical and physical condition- you know, no dents, scratches, blemishes..) email me… Thanks and btw, are you friendly with anyone involved with "Spica" Loudspeakers from Alb/Santa Fe ?? (They are truly wonderful things!) Take…
Couldn't have said it better myself!! Mike
Boot Problems
Message #45721
I've just replaced my 240M Maxtor with a 730M Quantum- It's the boot drive with WBench- I have a softkick machine (3000) and now every time I coldboot, I get the screen asking if I want I want to boot from floppies or "cancel" I always hit cancel and it…
Oh Jonathan…HOW'S THE 486 EMULATION!!! thanks
#ALPHAPAINT is KING!!!
Message #99809
This may sound childish to some, but SO WHAT!! I've just been playing with AlphaPaint again- GOD I LOVE THIS THING!! It really is amazing and fun!! (I'm making my own "Reporting Live" graphics overlays- inspired by OJ) This is a must have program if you love your Video Toaster!…
#Mounting PC drive
Message #181846
I have a friend with a SCII Quantum that he formatted on an MSDOS machine (fat mode) – he wants to mount and use it with AmigaDOS 3.1 (Like with CrossDos and PC floppies) What does he have to do? thanks very much in advance. Mike
AlphaPaint IS AWESOME INDEED!! I think an AlphaPaint Tips & Tricks column is a BRILLIANT idea!
Talk about luxury problems!!
I spoke to them right after someone mentioned they were doing the blowout at the VTExpo- they said they had none left-did they find some??- If so, I'll take 3! Mike
What do you mean VIDEO TOASTER USER has bitten the dust? What would lead you to that conclusion?? There current issue Dec/Jan mentions that February's issue will ship mid Jan- what do you know that we don't?? I believe in miracles
The 68060 WILL LIVE!!!
Message #180122
Just got off the phone with Jim Casper at MOTOROLA to ask about the rumors floating around about the 68060 being abandoned. He's says it absolutely false, it's going to ship shortly (he said first Q, then maybe as early as a month- he's the '040 guy filling in for…
Kitchen Snyc
Message #179918
Matthew= Did you ask me about a Kitchen Sync recently? (I lost the message)- If so- yes it's still available- let me know. Mike
I couldn't agree more! Mike
It's not a product yet
Stan I love AlphaPaint too!! (Super-Powerful and fun too!!) I would love to see some of your work- maybe you can u/l some to AmigaArts or email me some jpeg'd. Thanks alot- Mike- I would also be interested in sharing tips/cool stuff.
AD516 for $((??? I'll take a hundred! (You mean 1012, right??) and where did you see Eric's review of the VLAB? (I trust Eric, love his last name) Thanks
Speaking of the show…. HOW IS IT?? What can u report? How's the Flyer doin' these days? Are people upbeat about the possible rebirth of Amiga? How's Alphapaint going over ? (I LOVE MINE!- have an ArtPad, waiting for support)- What was Innovision's show special $ on APaint?- Any other…
Kinda like that Boing! logo modernized for the NEW Amiga- makes sense.
#Carver
Message #173639
John- I sell Carver and agree with your feelings about the 1090- cool amp. (I like the Arcam Alpha6 sonically, though- If you don't need the power) Take care. Mike
#AlphaPaint-Incredible!!!
Message #95187
Just finished the tutorials in the excellently written AlphaPaint manual- I have been buying Amiga/Toaster software for awhile now, and NO program has captivated me like AlphaPaint!! (and I got 'em all!) Hats off to these obviously VERY bright programmers!! I have spent more time with this program than with…
Greg- I ordered Brilliance 2.0- such a great deal I couldn't pass it up- and I want to support Amiga developers…BUT I was wondering…. Are you guys planning on a "Brilliance 3.0" ?? Or is this a last attempt to get as much $ as possible from the Amiga?- I…
Frank- Thanks for the report on APaint- I've played with it a bit and it seems fantastic! (the most impressed I've been with aa Amiga/Toaster piece of sw in a LONG time!)- I have a friend who has been using TVPaint SR. (and ToasterPaint for some stuff) and loves it…
#Picasso Helm
Message #93887
Good to see you here! I bought Helm awhile ago- looks good- haven't had a chance to really use it yet… Will 2.0 allow use of Picasso board? Helm will open now on a P screen, but only its orig. size up in the left hand corner. Helm running 1024×768…
Kitchen Sync Plus!!!
Message #167463
For Sale: Kitchen Sync Dual- TBC with S-VHS Option (~99 extra)- $1395 Retail value. (actually less than a year ago it was a $1900 value? $2000??- whatever; it's CHEAP NOW!).. only $995!- great with Toaster (and any serious video work!).. Send E-mail
#VTU is GREAT!!!
Message #92386
Just picked up the new VTU- boy is it great to see all those tutorials and "How To" articles!! THIS is what VTU should ALWAYS be like! TUTORIALS TUTORIALS TUTORIALS! I love those tutorials. Keep up the good work!
I missed the beginning of this thread- are we talking Wacom tabs here? I just got an ArtPad- and it seems to work just fine with a Driver for Wacom II-S I d/l'd here on CIS- It doesn't seem to like pressure sensitivity (I only tried it in Dpaint- which…
#HELP!!-DEAD MOUSE!!
Message #42707
Help!! I killed my mouse port!!- Like a TOTAL IDIOT I plugged a wacom artpad into the mouse port (after it didn't work in the serial port- I'm using 3.1 and I thought tablet support was built-in, although since then I found I don't have a "tablet lib.") I can…
New DeluxePaint?
Message #43579
Hi Orland- Just saw the CU-Amiga demo of dp 5- looks promising -PLEASE LET IT USE PICASSO (AND OTHER BOARDS0!!! TVPaint Jr. and Sr. both work beautifully on Picasso, and since dp5 will support 24bit- let it open on its own BIG screen- there are also some good animation support…
Joe- Do you have any info as to whether Nucleus is going to do a Flyer version of the Personal Editor? Sounds like that would be a natural! (and reasonable, I'm sure) Mike
I missed this one- is it a current chip, or one of those "Jetsons" Cray on a chip things that is being talked about? Mike
I've read a few times in the past month, Pleasance mentioning Lew Eggebrecht, with the implication that he'll be involved. Lew knows what he's talking about, doesn't he? Mike
#D.Pleasance Baffler
Message #163223
Everytime I read D.Pleasance stuff I get excited that the Amiga will survive (him talking about Amiga on a PC card is great proof he's at least awake!) I was a little confused by his saying that future Amigas would be all RISC- that AAA will be canned because the…
#68060???
Message #89055
What's the schedule like for the '060 products? I left a message here recently suggesting 2 board options you should make available- the super expandabel Zorro III board, and a regular cpu board with scii II (like the WarpEngine), but Jim Drew-ized and cheap! Any hope for this? and while…
Ditto!! (btw, WHERE is the text file- I've looked in the lib, but can't seem to find it) Mike
And on the subject of '060 boards… I think you should continue with your plan for a super zorro3 based board AND make your own WarpEngine like normal cpu-slot 060- but make it AFFORDABLE!!! Mike
What exactly is the ShaBLAMM (another Great name from NewTek!!) board? Thanks
Problems
Message #86655
Chris, I haven't heard anything more from you about my "crop visual" problem; I also can't open the "Compose" screen- I do believe they are related, no? I seem to have enough memory- I'm baffled! any help? Thanks in advance. Mike
I've got plenty of ram left.. changed maxmem of adpro just in case.. still the same.. hmmmmmmmm. Thanks for the speedy reply
#Chip Memory
Message #86412
When I try to do "Crop Visual" with 2.5- I get "OUT OF CHIP MEMORY".. the system says I have 1.7M available of chip.. I use a Picasso II.. anything come to mind?? Thanks alot. Mike
Page 1 of 4