This is an archive of CompuServe forum messages from 1985 to 1995, as saved in transcripts by John Foust.
Search Results (855 messages)
#COREL PRO/NW 3.11 ERROR
Message #87316
We had problems with NetWare 3.11 and Corel SCSI Pro on the Workstation !!! After mapping a CD-Drive with CDMAP, we can not access the them. All what we get is an Error message: CDR103: Not a HIGH SIERRA or ISO xxx drive can not read form drive …? Before,…
#scsi pro / netware 3.12
Message #87315
Hi there, i've got a big problem. when i load corel cdsrv on 3.12 the mapings at the workstation are diconnected in the middle of the session. reconnecting is impossible until restart of the workstation. i am unable to switch the subdir's on the cd. Hostadapter at the server: adaptec…
EPS FILTER
Message #87312
Corel corp. There is a known error with Corel 4.0s EPS export filter that causes a fraction on a millimeter to be cropped off. I have a six year old software development project which cannot go to print on account of this problem. Please put me on a list of…
#NEC-CD84/Problems Etc
Message #87311
I just installed CorelSCSI 1.2b on my system which is: 486/66 EISA ULTRSTOR-24F SCSI/EISA controller 32MB Ram ATI-MACH 32 video card NEC CDR-84 CDROM HP Scanjet-IIC 1.2gb Hard drive 3.4mb Hard drive Mediavision Pro Audio Spectrum 16tp Netware 3.11/Intel ETHEREXPRESS 16tp NIC DOS 6.2 SYSTEM.INI [386Enhanced]: EMMEXCLUDE A000-FFFF A couple…
Virgil, Thanks for responding anyway. Maybe someone from Corel has read this and knows some answers to our problems… Wim
#os/2 & Bernoulli
Message #87302
Bryan, Thanks for the info on the additional parameters for the Future Domain ADD line in my OS/2 Config.sys I then installed the Corel SCSI software from the os/2 diskette and it says it installed properly. However, I get 2 funnies in trying to use my benoulli 90M drive. 1)…
#CorelSCSI 2.0 upgrade
Message #87299
What is the policy on upgrades for CorelSCSI 2.0 for recent purchasers of CorelSCSI 1.2? Thanks, Terry.
#CD 4 upgrade
Message #87295
I just installed CD 4.0 – almost – several .cdr files were not found on diskette 5. I notice that there is an upgrade – does it provide these files? I want the upgrade in any case – I'm sending in my registration but would like to not wait through…
#Can't access PhotoCD
Message #87293
I can't access a photo cd through corel 4. I have a new texel cddrive and an adaptec scsi board. My friend has the toshiba cdrom and an adaptec board, and he can't access it either. Since we are both using the same drivers, is it possible that's the problem.…
#Corel CD Manager
Message #87285
Iave seen another user with a program called (I think) Corel CD Manager. Is this is a seperate program or should it have been bundled in with 4.0? If not a part of 4.0, how much is ita nd what is it designed to do that CD4.0 won't do? Thanks!
#4.0 Upgrade Request
Message #87282
Please send me the latest CorelDraw 4.0 Upgrade Serial Number CD4-114-241-625 Albert J. Wallace 819 Pleasure Park San Antonio, TX 78227-1829 Thanks in advance Jack
ArtShow3 Application Err
Message #87278
ArtShow3 caused a Generial Protection Fault in Module USER.EXE at 0019:039B. With the above error message, could you recommend a solution. I attempted all suggestions in literature to solve this problem. Please respond by e-mail.
#CorelSCSI 2.0
Message #87277
Bryan, I am addressing this to you because you posted the announcement (Upgrades and Packaging) about the 2.0 release. I just got 1.2b last week in an attempt to get access to my Insite Floptical under OS/2 2.1. I sent for information prior to purchasing the package and the magazine…
>>Just jump over to PHCP.
The Windows version seems flakey at times. I can run a complete backup and verify and come up with errors. Exact same sequence from DOS produces no errors. I guess that I will have to hang on 'til 2.0. Eh? Barry
CorelSCSI 2.0
Message #87264
What is availability and price to us suffering with 1.2? Barry
Lazlo: I use OZCIS DOS navigator program. (Available in GO IBMCOM….section 12, i think!). I have an old release 1.2(1). I think they now have Rel 2 there. It is great! and saves a lot of CIS charges by automating downloading of messages, and then uploading/posting your responses to CIS.…
#Business Forms Tracing
Message #87232
Contacted the sales support by phone requesting info on the Business Forms One Step Tracing as indicated in you advertisement. They knew nothing of the feature in CorelDraw 4. I need to scan and fill forms which can be printed using PS. Can the product fulfill these req uirements? Jan…
Wim: I'm sorry not to be of any help. I haven't had as much success as you have. Virgil
Kelly, Some of the JPEG files on the book were compressed using Apple's QuickTime version of JPEG which is not supported by Draw, PPaint, PhotoShop or PhotoStyler. Rus should have a copy of the book any day now and hopefully you can find a way to support this flavor of…
Ed, Yes I put my CIS address in the book and many folks have foud me that way already. Prentice Hall has also opened their own forum for discussing our book and other PH titles. Just jump over to PHCP. Foster.
Some of the JPEG files were compressed using Apple's QuickTime version of JPEG which Corel does not support. I am working with the publisher to try and find a way to distribute something which will convert the files. Glad you like it. Foster.
#UNI_ASP.SYS
Message #87172
Hello, i'd like to know if i can tell to UNI_ASP.SYS to mount my ricoh removable optical at a specific letter (H: for example) and not the first available letter ? thanks…
#Corel SCSI Support
Message #87170
Paul, Can you tell me how to get a couple of questions answered about my CoerlSCSI controller? The questions are: 1. Is a new PATCH program required for MSDOS 6.2 or will the 6.0 PATCH program work? 2. My Storage Dimensions 1 gig R/W optical drive was running under DOS…
Corel Filters
Message #87162
Ben, Re-send this message in the Corel SIG's section of this forum. Jeff Johnson will answer your questions and provide you with information on the Corel Filter Development Kit. The kit describes the .CMF (Corel Metafile) format which is the intermediate step for all import and export filters. Rus Miller…
#DPT smartcache III
Message #87153
Does Corel SCSI for OS/2 support the DPT Smartcache III PM2022 and 2122 controllers? \if it does, does it work in conjunction with the hardware cacheing and RAID options modules for these cards? Thanks, Andrew Stuart
#Help me on Pantone
Message #87150
I called the service line on this question, and got no help. My question is on the color RUBINE RED C, in the Pantone color book. This looks on the screen and on the printer almost exactly like RHODAMINE RED. Pantone says that RUBINE is 100% Magenta and 15% Yellow,…
Thomas, If you read the posted apology you would understand the tardiness of the response. Yes that is correct. Laszko
CD-ROM Driver
Message #87145
Ron, If you read the posted apology you would understand the tardiness of the responce. The /XA switch gets placed on the CUNI_ASP.SYS driver line. CorelSCSI version 1.2b does support PCD formats. I hope this helps. Laszlo
S/W RAID for N/W 4.0X
Message #87144
David, If you read the posted apology you would understand the tardiness of the responce. It is looking like end of December middle of January now….I hope this helps. I do not anticipate a later than end of January release. Laszlo
Raymond, If you read the posted apology you would understand the tardiness of the responce. No problem! Laszlo
smartdrv-corel SCSI
Message #87142
Arthur, If you read the posted apology you would understand the tardiness of the responce. no problem… Laszlo
Christopher, If you read the posted apology you would understand the tardiness of the responce. The rights would be identical as those for other Netware Volumes. Try increasing the the timeout of SPACE with a /TO:45 this might help the file not found message. That or try rebuilding the Infobase.…
Adaptec 1542C,SQ3105S?
Message #87140
Jack, That seems to be the case with a couple of other controllers from what I've heard. Laszlo
#Corel 4 update
Message #87138
Donna, I received the SCSI 1.2 update, thank you very much. I am still waiting for the DRAW 4.0 update I recall reading an ad: Corel is coming in 20 languages and for the Mac. Do you know if a French version is available for Windows and/or the Mac? Thanks…
#CDAUDIO problems.
Message #87137
I have found that, if I leave CDAUDIO for Windows running so it shows what track is playing, I get serious delays when using other SCSI equipment on the same SCSI adapter. For example,
Hi Dave, >> I have been considering purchasing a 128 Mb optical drive and wondered how you liked yours. When it worked for a week it was fantastic. Suddenly it stopped working and I have sent it back to Pinnicle. They said that I would have a replacement within a…
#Ooops, My Apologies..
Message #87135
Well, I really must admit that the forum has been rather slow. I attribute this directly to the fact that I was unaware that responces were ATTACHED to the messages I left !!!! (duhhh!!!) I entered the forum, downloaded the messages and disconnected. When I answered the question, I checked…
Wes, I can understand the tone, I am at wits end here as well. I was down in the LAB yesterday talking with the QA technician who was responsible for the controller. We went over his notes and found nothing that would indicate the problems that you are experiencing. He…
Roger, The deficiency is not in the CorelSCSI device drivers, but in the inability of the controller to operate properly in such an environment. I would suggest using a controller better suited for this environment. The Corel device drivers allow the operating system access to the device. The operating system…
Artshow 3 problem!
Message #87131
George, The error is a common one. You'll notice just before the GPF you'll get a message that states that the default midi setup will not play correctly then WHAMO! All you'll have to do is -run MEDIA PLAYER -file open from the cd rom -choose the MIDISOFT directory -dounble…
Virgil, I'll need some further information before I can head of in a given direction. So far, it sounds like termination. Model of SCSI conrtroller and drive. The version of Netware. Amount of RAM in the SERVER. Other devices on the BUS. The version of our software. Cable lengths. Relevant…
Victor, To get the ASPI interface to work, there are a number of things that you must do to the ADD line for the Future Domain; /A:0 /!DM:x /!SM:x Where x is the SCSI ID of your Bernoulli. When you installed the software no ASPI manager was found so we…
Thomas, The differences are many. I will try to outline them. -new windows interface -new dos interface -support for scanners, printers, cd rom writers -all dos utilities migrated to windows -enhancements to the Netware CD ROM and Jukebox solutions. -auto configuring driver -patchless drivers I hope this helps. If you…
Andy, Do you have any further details…..card, aspi, drive, memory, how many devices and termiantion. Laszlo
Andy, CorelSCSI PRO is a completely new product from CorelSCSI. The difference is enourmous. With the CDD 521 you use a command called CDCOPY to transfer data to the CD ROM. It works much like the xcopy command. The Kodak Photo CD format is still under wraps I believe. When…
Barry, The tape software was designed to use conventional RAM only. With larger savesets, more memory is used to store and display files. The workaround is to copy the VOL and CAT files to the directory that our Windows tape software is loaded in. If you then use the Windows…
Dave, All you will have do do is post a message in our Customer Service section right here in Compuserve! I hope this helps. Laszlo
Pascal, Like any other Netware volume, you cannot simply add a drive to it and span the volume across the new drive without backing up the entire volume. I hope this helps. Laszlo
Terry, Our Customer Service area here on Compuserve would be better suited to answer those questions for you. I can tell you that there are some update guidelines. Laszlo
Page 3 of 18