This is an archive of CompuServe forum messages from 1985 to 1995, as saved in transcripts by John Foust.
Search Results (53 messages)
#Newsletter Posted
Message #5432
The latest issue of THE MULTIMEDIA AND TECHNOLOGY EXAMINER has been uploaded to Library 2 of this forum. This issue covers DARK FORCES from LucasArts, the MASTER HUNTER Probe from Harris-Dracon for the HA/BA Installer, movies on CD-i, and more. This issue also marks the commenmcement of coverage of the…
You can reach them at (503) 626-8400. They offer three products currently for PC to video conversion… The MagniCoder: An external box for working with laptop or desktop computer systems. It will convert up to 16.7 million colors. The Desktop CG: An internal ISA card which will convert up to…
There are some adapters made to go on the front of a standard camcorder which accept slides, the intent being to videotape the slides. Most of the results I have seen from these have been pitiful. I did see one, used with a Sony CCD-V5000, which worked very well. The…
Take a look at the Tamron FOTOVIX IIIS. It provides S-Video and composite video outputs, and accepts both slides and negatives. You can find a review of the unit under the filename FOTVIX.TXT in Library 2 of this forum. The unit can be obtained via mail order from B&H Photo…
I have had the XV-D1000 up on a W/VS and it is technically very good. The video doesn't demonstrate artifacts unless you are using one of the highly digital modes where it is meant to look digitized. It was better than an MX-1 which was evaluated. (I didn't evaluate it…
It can do both a standard dissolve (from one source to another) as well as fades from video to a color. It also offers the bit-defect function which pixelates the video as it is being dissolved. James Bell Jr. — Multimedia Contributor – CompuServe
I recommend the XV-D1000 very highly. It is easier to use than the MX-1 from Videonics, and from the examples I have seen, offers higher quality. You can get details on it in the file PART3.ZIP in Library 16 of the Multimedia Forum and Library 2 of the DeskTop Video…
I don't have either of these monitors since I don't use the Magni XR-200 (the original product) or the GVP G-LOCK (the product which GVP bought from Magni). CTX makes OK monitors, but their laptops really stink. James Bell Jr. — Multimedia Contributor – CompuServe
Those are the only two monitors I am familiar with which have the feature you need as for the sync rate. I don't know of any others which offer that. Depending on the "added enhancements" you might want to wait until after NAB. James Bell Jr. — Multimedia Contributor -…
You can reach them at (503) 626-8400. They have an 800 number, but I don't remember it right off hand. I think it is in the file VGAPRO.TXT in Library 2. James Bell Jr. — Multimedia Contributor – CompuServe
They are a bit expensive, but they are WELL worth it. Take a look at FOTVIX.TXT in Library 2 of this Forum. That should give you some information. James Bell Jr. — Multimedia Contributor – CompuServe
Take a look at the following files in Library 2 of this forum… PART1.ZIP, PART2.ZIP, PART3.ZIP, VGAPRO.TXT, EZVSQ.TXT, VIDEOD.TXT, VBOX.TXT. These files should get you started. The PARTx.ZIP presentations run on an IBM-type PC with Microsoft Windows 3.1. James Bell Jr. — Multimedia Contributor – CompuServe
I use the EZV2 option prevoiusly mentioned and have found it to work well enough, at a cost that is low enough, that I recommend it highly. You can also contact Ron Cwik (sounds like Swick) at 708-213-2227. He sells mail order at great prices, and iiis very competetive. James…
Take a look at the VGA Producer Pro. You can find more info on it in the file VGAPRO.TXT in Library 2 of this forum. It will do what you are looking for with real professional quality, and more. James Bell Jr. — Multimedia Contributor – CompuServe
They deal with both Multimedia (as it applies to the IBM-type PC platform) and to DeskTop Video, DTV being one aspect of Multimedia. James Bell Jr. — Multimedia Contributor – CompuServe
#3685-
#Adding titles to video
Message #3687
Larry, Check out VGAPRO.TXT in Library 2 of this forum. That is a product that will do exactly what you want. See also PART1.ZIP, PART2.ZIP, and PART3.ZIP. James Bell Jr. — Multimedia Contributor – CompuServe
Take a look at the following files in Library 2 of this forum… PART1.ZIP, PART2.ZIP, PART3.ZIP, TMTE0*.PDF, and others. These will get you started. (The PARTx.ZIP presentations are designed to run on an IBM-type PC with Microsoft Windows 3.x). Hope this helps… James Bell Jr. — Multimedia Contributor – CompuServe
#3092-
Newsletter Posted
Message #3111
"I would love an article re the current state of home networks using COAX. IE. devices that encode signals (wether analog/digital err. wether from analog or digital _sources_) into a waveform/frequency that can be carried by the COAX." This is one of the items I will be covering in a…
#Newsletter Posted
Message #3075
Hey all, Volume 2 Issue 2 of The Multimedia And Technology Examiner is now available in Library 2 of this forum under the filename TMTE02.PDF. This issue marks the beginning of coverage of the CD-i platform, and features an introduction to CD-i. SFX on CD-ROM, a sound effects library for…
Newsletter Posted
Message #3049
Hey all, Volume 2 Issue 2 of The Multimedia And Technology Examiner is now available in Library 2 of this forum under the filename TMTE02.PDF. This issue marks the beginning of coverage of the CD-i platform, and features an introduction to CD-i. SFX on CD-ROM, a sound effects library for…
I just got the specs on the Tek unit and it is composite only. The unit I am leaning toward recommending is the Magni MM-400 ($1500 or so). It handles Y/C and composite in both NTSC and PAL. If the Tek unit was Y/C the choice would be more difficult.…
In order to get the I and Q vectors on SMPTE bars you would need to generate a negative RGB value. Since it is difficult (if not impossible) for most PC-type systems to do this, you won't find these generated on most computer systems. My understanding is that the pluge…
I have done some preliminary evaluations in preparation for some in-depth reviews of these units. I am not looking at PC based units because, in my opinion, they are not too useful for DTV situations. Most of the DTV enthusiasts (amateur and professional) I have run into have only one…
Take a look at my review of the Magni VGA Producer Pro in Library 2 of this forum. I have looked at a number of products to go from PC to VGA with genlock (the capability you describe) and found this one to be the best I have seen so…
I reviewed the original SnapPlus quite some time ago and was NOT impressed. The video quality was terrible and the software was worse. I eventually ended up recommending the VGA Producer Pro from Magni Systems for video output. I was contacted by Cardinal a couple of weeks ago. They have…
#2419-
V5000 RC ??
Message #2441
The one feature which the CCD-V5000 lacks is RCTC. You can record with the camera and then run it through a CVD-1000 or EV-S7000 to add the TC, but the camera just can't do it. James Bell Jr. — Multimedia Contributor – CompuServe
Andy, One of the ongoing projects I have been working on over the years is reviewing components to allow you to make your own PC for DTV work. My latest recommendation is based on i486 architecture, but I am currently working on a version of the specification for Pentium 90…
The VGA Producer Pro will perform the operation you are looking for It provides an RS-170A (SMPTE 170M) signal which can feed any mixer/switcher. It does work in only 256 colors which is a disadvantage. I am looking at other products now, but I have not yet seen anything which…
Pete, There are a number of cards on the market to perform this function. Some of them have built-in tuners (you just plug them into the cable or antenna) while others have composite or S-Video inputs (you hook them up to a VCR which acts as a tuner). The first…
Thanks for the information. I'll get in touch with their people and see about writing a review for the forum. James Bell Jr. — Multimedia Contributor – CompuServe
New File
Message #2042
Hey all! I just wanted to let you know that I have revamped The PC, MULTIMEDIA, AND DTV EXAMINER. The name of the publication has changed, as has the format and the means of distribution. You can find Issue 1 in Library 2 of this forum under the filename TMTE01.PDF.…
I am awaiting a unit for review now. It does accept S-Video input and the software which is included supposedly includes line-doubling technology. I'll be able to say more after I have seen the unit. James Bell Jr. — Multimedia Contributor – CompuServe
Since you haven't opened it yet, I'd strongly recommend that you return it. When I reviewed the unit, quite some time ago, it was a poor performer in both hardware and software. You would need to give up your current VGA card if you install it since it has VGA…
There are a large number of these cards available. Some which do a fair to great job are…. Truevision BRAVADO 16, New Media Graphics SUPER VIDEOWINDOWS, and the Creative Labs VIDEO BLASTER FS200. Hope this helps… James Bell Jr. — Multimedia Contributor – CompuServe
You will find in video that you get what you pay for. If you buy a cheap solution you will get cheap results. I reviewed a number of PC to Video products a while back and found this to be the case. Take a look at some of the files…
I would try calling the following mail-order companies… Ron Cwik (sounds like Swick) at Video Snapshots (708) 213-2227 ComputAbility (800) 554-9954 Camera World (800) 729-8937 (Gil or Bruce) B&H Photo in NYC (800) 947-9929 and any local higher-end video stores. (NOT Silo and those stores). The mail order places will…
I have done some video production similar to what you are looking to do. What I did was to use a Magni VGA Producer Pro to handle the PC video side. I had a camera pointing at me while I was sitting in front of the PC (a Hi-8 Sony…
I have only seen the supergen once. From what I recall it was not bad. The VGA Producer Pro was at least as good if not better. ABC uses it routinely, as does HBO for titling. I use it for educational videotapes (teaching how to get into multimedia and DTV…
Take a look at VGAPRO.TXT in Library 2 of this forum. Over a year ago I reviewed a number of PC video output cards with genlock functions. The Magni VGA Producer Pro is my current recommendation. It will handle what you are looking for and features an external remote control…
I have not encountered any external genlock systems for IBM-type PC systems. All of them that I know of are internal. James Bell Jr. — Multimedia Contributor – CompuServe
If you own a PC, you can use a genlocking video card. You run the footage from your source tape into the card, use PC graphics software to add titles, then the combined signal is sent to a recording VCR. The card I currently recommend is the VGA Producer Pro…
It sounds like you are looking for an external unit with genlock (possibly for titling). If this is what you are looking for, I haven't seen any. There are a number of internal genlocak cards which install into your PC. The VGA Producer Pro is my current recommendation. I will…
Bruce, You may find the PARTx.ZIP presentations in Library 2 informative on your situation. PART2.ZIP describes how to put an IBM-type PC together which will accomplish the task you have outlined. PART3.ZIP describes additional audio and video components you can add to make a professional looking video for a less…
#Survey
Message #934
Hey everyone, I'd like to take this opportunity to wish everyone in the forum a Merry Christmas and a Happy and Prosperous New Year. I look forward to working with you in the coming year. I'd also like to do a small survey, which may flood me with E-Mail. Please…
Right now I'd go with the TR-700. There are some differences in the implementation of the LANC (Control-L) protocol between Canon and Sony. Sony invented it and their cameras usually support all available commands. Canon doesn't alway do that. The TR-700 is a great unit overall. It is my current…
I think I could fit it in, I just wnet through my notes from Fall COMDEX '94 and it looked interesting. I'll leave you an E-Mail message with the details on where to send it.
#727-
New Member
Message #728
I have posted reviews of a couple of PC genlock devices in Library 2 of this forum. There are several on the market, the operation of each is quite different. The one I currently recommend is the VGA Producer Pro from Magni Systems, Inc. It is a full length card…
There are a number of services which will do this, normally to what is called a Kodak PHOTO-CD. Your yellow-pages should list these under PHOTO. You can also scan the photos in yourself and give them to a CD-ROM mastering service. The advantage here is that you make them look…
#Uploading
Message #627
I tried uploading a number of files to Library 2 and got an error that uploads are not permitted to that library. I think one of the flags needs to be changed. Always fun when setting up a new forum:-) James Bell Jr. — Multimedia Contributor – CompuServe
I'll start uploading them right away. Thanks! James Bell Jr. — Multimedia Contributor – CompuServe
Page 1 of 2