This is an archive of CompuServe forum messages from 1985 to 1995, as saved in transcripts by John Foust.
Search Results (147 messages)
John, The transitions and animations on the Windows side just aren't smooth when compared to the Amiga. I am hoping the Amiga can grab some attention over here where I work, but I am not pushing anymore. I am finding myself becoming more of a cross-platform worker. Good Luck on…
#Scala MM300
Message #216726
Hi John, >Ah! Then all you need is Scala MultiMedia MM300 for the presentations!< I would love to get Scala MM300, and I may still someday. I an keeping my Amiga purchases to the minimum for the time being. Although I render on the Amiga, I compile to .AVI and…
Rafael, >>I would tell you that one of the "embedded applications" of MC68020 is FADEC (Full Authority Digital Engine Control) for turbofans. And that's not a joke…
Chris, Doesn't the program RealConvert convert dxf files to a real objects. Then they can be converted to spline mesh types and if neccesary use triple end points/lines. Just a thought.
Hi Mark, I use Real 3D daily and I am quite pleased with it. The interface is quirky at first, but that's because it is so flexible and customizable. I believe the programs's strongest point is its rendering output – absolutely gorgeous. The weakest point is its abilitly to use…
Hi Dan, Glad to help when I can. You have to do a lot of experimenting with the screenmodes and environments to get the hang of them. Once you get that animation screen to open up, go to Environment>Open Screens and open a screenmode of your choice. Then you'll be…
Hi again Dan. The problem you are having loading the projects are because they originally made in a different screen mode than is currently available. The project should still load in a default (workbench) screen mode. From here you can change the environment to a sreenmode of your preference. One…
Dan, Real 3D comes with an Opal_r3d.library that goes in your LIBS: directory. Once in the program, you enter this lib name in the External Screen>Settings dialog box. I use it for my Opal board all the time. Hope this helps.
Thanks Wayne, those are excellent suggestions.Some I have tried, some I will try some day. For now, I'm tired of fooling with this. I dug out a ROM switcher I had lying around and put KS 2.04 on one and 3.1 one the other. The tape drive _does_ work again…
Thanks Steve, Did you find any problems with QBack or AmiBack.
Joachim, That's interesting. I'm using version 1.26. I have a hunch its not the Workbench version stopping Diavolo from working because the lock-ups are instantaneous. The other programs lockup randomly after a few minutes.
Hi Wayne, Well I don't understand it. My A2000 PPS '040 with 3.1 sure don't work with my tape drive after trying two different controllers with three different backup programs. And it sure did work before 3.1 (using WB2.1). Darn! I'm still scratching my head and trying different things. I…
Joachim, I have not had luck with Diavolo and 3.1. Are you using tape to backup to? By any chance did you have incompatibilities with Amiback or QBack?
Robert, I think backing up to a tape drive is a different animal. It took me a lot of work to get it running at first, but its been doing fine for two years under WB 2.04 or 2.1. Major disappointment.
Jonathan, The problems I am having are random lock-ups and gurus while backing up to a Tanberg tape drive on an A2000 with WB 3.1. I had no problem doing this for some time using AmiBack or QBack on WB 2.04 and WB 2.1. I have tried using GVP Series…
Thanks Tom for you reply, I have now found out that AmiBack 2.0g or h, QuarterBack *and* Diavolo (the demo) don't work with the Tanberg tape drive on my A2000 with WB3.1. I was using AmiBack or QBack with tape drive on my WB2.04 or WB2.1 system for 2 years…
#AmiBack2.0 vs WB3.1
Message #185847
Hi all, I found that after installing WB 3.1, my AmiBack 2.0h stopped working (consistent lock-ups during backup to tape drive). Does anyone know if Ami-Back 2.0h is definately not compatible w/ WB 3.1 or perhaps it is something else in my system? Does Ami-Back 3.0 solve the problem? Are…
#Retina or Picasso II ?
Message #183141
Kyle, I don't think the Picasso manufacturer is out of business. It could be they are slowing down on Amiga products. Not sure
Don, I'm afraid I can't be much help. I don't play any AGA games, and my monitor (Mitsubishi DiamondScan) was easily set up. Good Luck
Hi Adam: Thanks for the kudos on that engine model I did. I spent quite a long time on it but it was fun. Maybe I should upload it here. Looking forward to the improvements in Real 3D. It is a fantastic modeling tool. I am glad you guys have…
Craig, I have two of the Real 3D video tapes: The Basics (which is just that) and Motion Magic (which covers animation methods pretty well). They have another out called Optical Delusions, which covers Material usage among other things. I don't have that yet. The tapes are $69 each I…
Craig, I have been using Real 3D for a couple of years on a hobby basis only. I can answer basic questions but I haven't used the advanced features much. Did you know there is a series of tutorial video tapes (3) out? It's a drag sometimes using a little…
I would bet you Scala software could help with the animation speed and the pause between anims, but you'll have to let Scala compile the animation in its own anim format. What resolution/colors are you running in. John Chang from Scala is usually around these forums.
I found a source that sells used ones for $35 plus S+H. Copperhead Tech in the back of May Amiga World. Don't have PH # handy.
Hans, I must admit I haven't tried in quite a while, but from what I remember you will have a hard time getting a better picture than the b/w hi res camera with color wheel gives you. More memory should allow you access to more modes, but I don't believe…
Hi again Mike. Can you tell me about this cotroller. Where would connect to an A1000? Is it enclosed in anything?
I can suggest that you use the highest quality cables you can get. I use cables with gold plated ends. I found a significant difference, especially in 24 bit.
I have an ICD AdRam with no memory on it for $30 including shipping. Barely used.
#Multisync monitor
Message #135823
I have one of these monitors and I believe if you measure the diagonal of the screen you'll find it is 13". Excellent monitor anyway.
Yes Dale, I wish I could afford a monitor that scans higher, but this monitor was only $600. And I think 1024 x 768 will be hold me for a while. Just for comparison, I noticed Mitsubishi's latest 21" offering lists for $3200.
OK, I figured out that I'm supposed to have the monitor memorize the adjustments for the different scan frequencies. It can remember six different settings for six different frequencies. Everything is rosey now 8>).
Yes Richard, I got my info from you. I am using the 20" (actually 19") now. Thanks for the tip! Pretty nice, heh. They told me they did not have a 17", but had a 16", however they said it did not sync down to 15kHz. Can you give me…
Michael, I got it! Here's the scoop: First of all, it is actually 19" when I measure the diagonal, although I was told it is 20". Also, it doesn't say "Diamond Scan" anywhere, although it looks exactly like the 19" Diamond Scan I've seen at work. I've hooked it up…
Paul, You didn't jump in on this thread, I just changed the header from the Busted Buster thread. Funny how that can cause confusion 🙂 These a factory refurbished units and they do scan down to 15kHz. I'm using it now! See my next message to Michael for more details.
#20" DiamondScan
Message #134770
Michael, I ordered the monitor from a place called Video Works in CA. Richard Beausang here in this forum got the 20" unit from them and he says it looks nice. I figure you can't go wrong with a Diamond Scan. I'm using a 13" one now. They shipped to…
I just ordered a newly factory refurbished 20" Mitsubishi DiamondScan for $600. I'll let you know how it works out. It syncs down to 15kHZ and has max resolution of 1024 x 768.
I have an ICD AdRam model 2080 board for the A2000. It works fine. Barely used. How about $35 and I'll pay shipping.
Michael, there is a file in the libraries here that is loaded with good drum sounds. It is SNDVL1.LHA . It is a large file but includes a wide range of different percussion sounds.
David, this is wonderful news. I have been waiting for some sort of tutorial to be available for Real. If the first one is good, I'll be getting the whole set. And I have been struggling with that new shrink-wrap feature. Do try and spend extra time on that. Thanks.
Daniel, have you seen the ads for Retina Video Encoder, S-VHS + Composite out for ~$125 (AmigaMan in Amiga World). This is an add-on to the Retina board. Don't know if it's been released. BTW Opalvision DOES output NTSC (you need to add external encoder for video tape) and allows…
Hi Daniel, To quote from the OpalVision manual: "Warning: Never plug a monitor into the standard 23-pin Amiga Video Port while an OpalVision card is installed in your Amiga. This may overload the output circuitry in your Amiga and cause permanent damage." Now in reality I think this only applies…
Russ, I have the OpalVision board and I am very happy with it. Superb paint program and excellent animation player (20 fps with my A2000 '040). The additional modules aren't out yet though. I use 8N1 for my settings on the BBS. Now I paid $675 back in April and…
Thanks Gary. I checked those areas and (using my eye) nothing looked bad. I thought for sure it would have been those fuses, but no. Oh well, I can't complain after 8 years of service. Ya know I paid five bills for that back in '85. It looks like a…
A1080 Monitor Repair
Message #123520
Hi all. My 1080 monitor just quit after 8 years. There was a small flash from the back and now the power won't come on. I opened it up (power disconnected of course) and found two fuses (the old auto type) but they were intact. Nothing else looks fried. Anyone…
I'll offer $125.00. If you have any software to throw in I'll up the bid. John
#122683-
#AutoCAD-Lightwave
Message #122956
Adib, you should post this to Syndesis in the AmigaVend forum. I believe John Foust over there wrote the DXF converter for Lightwave and also publishes InterchangePlus, a 3D object conversion program. The latest release (3.0) includes DXF and 3D Studio format, in addition to most Amiga formats. John
Yes John, people are reading this thread and are very interested in VCR control using LANC. Please upload any and all stuff you have on Scala and InfoChannel. Your outfit is really hot now and getting good mention in even non-Amiga mags. Your presense here is also making a big…
Hi John, The news about InterChange Plus V3.0 is exciting. DXF and 3D Studio built in terrific. Can you tell me what the suggested retail price is. Also, if I may, I had heard from the people supporting Real 3D that you will be doing a converter for their format.…
Hi John, The onlly graphics boards I saw mentioned were the GVP IV 24 and AVideo. Is there support for any other boards? (Like OpalVision). John
Alan, or anybody, I just d/l'd Mapboard to use on my A2091. I noticed you have been using it. What is the correct option to use for the A2091 board? The docs say to enter "A2091/S". What is that trailing "/S"? I have tried several different choices for "S" and…
Page 1 of 3