This is an archive of CompuServe forum messages from 1985 to 1995, as saved in transcripts by John Foust.
Search Results (274 messages)
Oh.. I forgot to mention, I am using an Amiga 2000. How can I tell what the SCSI device number is for each of the drives? Allen
Michael, I am using a CMB 2091 controller with the latest ROMs. My boot disk is a Quantum 80 meg HD that is causing no problems at all. I am not sure of the SCSI device numbers for the Quantum 80 and the (problem drive) Quantum 210 (which is causing…
#Hard Drive Errors
Message #47416
My Quamtum 210 is exhibiting a problem. It continually produces read/write errors. I have even gone so far as to re-low level formatted it and when copying my files back over, the requester box (read/write error) still pops up. The drive is about 4 months old and this is the…
Hard Drive Errors
Message #47385
My Quamtum 210 is exhibiting a problem. It continually produces read/write errors. I have even gone so far as to re-low level formatted it and when copying my files back over, the requester box (read/write error) still pops up. The drive is about 4 months old and this is the…
Single char input/asm
Message #15799
I am looking for a routine that will get a single character inputted from a user (without the need for pressing RETURN that Read() calls for). My program is using an already existing CLI for input/output. This routine also should be able to check if the user pressed Ctrl-C. Thanks…
John, Apparantly, 'bitsback' was a command that left out of the current adobe protocol. I've only encountered one program that requires its use (Smart Art for the Mac). Everything seems to run very well and I'm very happy with the QMS-PS 410. Regards, Allen
Which Laser Printer?
Message #31162
John, I've got my Amiga and Mac hooked up to a brand new QMS-PS 410 and I really like it. It's not as quiet as my DeskJet Plus, but … 🙂 Just found out that a Mac program called "Smart Art" won't work with it (sigh). Smart Art needs a…
Wayne, It's kind of a small street. Runs perpendicular to Sunset. I believe just north west of Cahunga (did I spell that right?). Regards, Allen – Cole Place Music Board (714) 827-3265
BBX is a nice board, that's for sure. Steve's done a good job with it. However, you might be interested in knowing that DLG is readying a module that will allow you to run an online store. I believe they are looking for beta testers now. Good luck with whatever…
#29291-
AmiUtl.lzh
Message #29504
Wayne, Not sure who the 'Cole' is. The name comes from a street (Cole Pl.) in Hollywood that has special meaning to me. Alpheus Music Company use to be located on that street and whenever I was in I would always see someone famous, have a chat and generally enjoy…
Hi Ben Just curious as to what BBS software you are changing to. I run a BBS in Southern CA. for musicians on an Amiga 2000 and really like the software I am now using. It's called DLG (formally Dialog) Professional and it's got some amazing features. You owe it…
AmiUtl.lzh
Message #28213
I just downloaded AmiUtil.lzh. It's a very nice directory utility. Does anyone have docs for it or a way to contact the author for shareware fees? Thanks… Regards, Allen – Cole Place Music Board (714) 827-3265
Are you going to be using the computer (Amiga or Atari) for Music/MIDI related tasks?
Betty, Great idea… I will do that, thanks! Regards, Allen
Boy… I know I would jump at the chance to get an Amiga laptop! I know 16 shades of gray (???) wouldn't look as good as all of the colors we are use to seeing, but the other benefits definitely out-weigh that minor detail. Regards, Allen
Benjamin, Why do you way that Spirit Technology's MIDI STAR is the best Amiga interface? What's it got going for it that the others don't? Thanks, Regards, Allen
A1000 for sale
Message #16435
Amiga 1000 for sale! 512k 2 floppy drives original manuals! Good condition. Asking $400 It hasn't seen much use since I got my 2000 and it really needs a good home. Email here or call Cole Place Music Board (714) 827-3265 Regards, Allen
Ahh.. OK, sorry for the confusion. Regards, Allen
I don't know much about QBack Tools, but I read that it has problems with CBM 2090 controllers (or was that 2090A controlloers?). Anyway, that may be your problem…
Chris, I agree completely! See my Email message you to for further details.
Thank you, I'd appreciate it much! Regards, Allen
Chris, A lot of folks around my area like C-Net. I should be able to find something out for you in the way of games. I am currently running DLG Pro (formally called Dialog Professional). It is also a very nice BBS program. Will run anything that runs in a…
Steve… this is news to me! Would it be possible for you to obtain the name and address of the company that put out that catalog? I'd love to have something (ANYTHING) to show the Apple folks in my district (my junior high just bought a room full of IIgs…
OK.. sounds like you know! 🙂 Have any idea when System 7.0 will be released? Regards, Allen
Paul, Saw your message about your friend who is trrying to create a DMCS clone in assembly. It sounds interesting! Is he still working on the project, and if so, how are along is he? Thanks… Regards, Allen
Brooks, You may have mistaken me for someone else. I do not own or use (play with?) Faery Tale Adventure. Sorry… Regards, Allen
Steve, You have been using System 7.0 on the Mac? Are you a Mac developer? Regards, Allen
[ continuation ] Steve, I feel the Amiga is BETTER than ALL of the rest. My point is (and has been since late '85) that the Amiga is not getting the support it's due. Regards, Allen
> The Amiga has far more sound manipulatioin software.. What sound? The Amiga's internal – that's nice, but hardly usable for most pro/am work. I know of only one sample editor (of course there is Synthia). > and what MIDI software is has is comparable to the best of the…
Ron, I appreciate your insights! I have not used DTP on any other platform, but I have seen them demonstrated. Aldus and Adobe looked much more capable than with I am use to (ProPage). I don't know about you, but I don't have a need for postscript color output :)…
Chris, What BBS software are you running? Regards, Allen
> I think the ONLY advantages the other machines really have is a larger > installed base (at least in the USA), and a larger variety of business > software. Steve, Mac, IBM AND the ST all have a larger music/MIDI software catalog. There seems to be more (and better)…
Gee I wish I could help you, but I'm lost here. What were (we?) talking about, and what's FTA?
Thanks for the reply Melissa. I will give you a call. Regards, Allen
Ahh.. OK, that makes more sense. He is in charge of CBMSER. OK, I thought that he was doing the 8-bit forums as well. Thanks for your help. Regards, Allen
Vance, Dialog BBS uses the Amiga's capabilities rather nicely. In fact, I am running my BBS right now as I send this message to you (via Whap) all from the same computer. No, it does not have Skypics, but that's ok with me, I really don't miss it that much.…
> You'll be pleased to know that the new Bars&Pipes Professional, which > debutes in a month, is absolutely gimmick-free. In fact, its interface > is nothing short of stunning. Really! Melissa, Is this interface changed in any way from the current version of Bars&Pipes? Regards, Allen
Betty, I certainly have no desire to make Dave work any harder than he already does. It just seems to me that CBM's interests would (should?) be switching from the 8-bit fora to the 16-bit fora. Regards, Allen
Glenn, Good luck with Paragon! It's a powerful system. If you have local support, I'm sure you will find it most helpful. Regards, Allen
Steve, Tha's good to know. I'll have to give them a call. Do they have any plans on running a support BBS? Regards, Allen
Thanks Bob, I do appreciate you all trying to follow up on this for/with me. I'll take your advice and compare startup sequences. Regards, Allen
Bill, Yes, I have "path DH0:lc/c add" in the startup sequence. At first I thought that could be the cause. I quickly learned that wasn't it. 🙂 I think it's something overly obvious as well… and I've checked everything I can think of. Appreciate it if you could give me…
Glenn, Fido support is integrated into Dialog in that it will accept net and echo mail into its message areas (keeps msg points properly updated for users, etc.). 3rd party programs are needed to converse with other Fido boards (TrapDoor, etc.). Dialog comes with script files prepared to interface with…
#3211-
#Lattice link problem
Message #3288
Bob, I've tried to compile it in several different places (RAM: DH0: etc.). They all meet with the same error (605 Cannot open with file '"HelloWorld'). I tried something tonight… I booted from the original Lattice disks and compiled with that interface (instead of booting and running off of the…
Hi Glenn, I am presently running a Dialog Professional BBS system and I really love the software. It's very easy to use from a sysop's stand point (much easier from what I hear than Paragon). Some one else left you a message saying the Skyline was a close second to…
Don, That's exactly what I've been doing. Actually, the hello world is just an example program (to show that I can't even get the beginner stuff to compile! 🙂 Thanks for any help… Regards, Allen
Hi Bob, I've been trying to use: 'lc -L HelloWorld' No quotes. The File is stored in ram: and called HelloWorld.c Regards, Allen
Angelique, Dialog Professional BBS uses an interesting approach to doors. That being if it runs in a CLI and is CTRL-C breakable, it'll run as a door on Dialog. Don't know what could be easier than that! 🙂 Regards, Allen
#Lattice link problem
Message #3152
I am having a bit of a problem with the Lattice compiler that I hope someone can help me with. When I compile a program (even a simple 'hello world' type thing) I get this error: Error 605: Cannot open with file '"HelloWorld.lnk' This is suring the link phase. I…
Steve, Hmmm.. I haven't experienced a crash since I stopped using SID (when I read your first message about it). However, I don't think I ever had a crash while accessing the program, although most of the time, the program was up and running. Very interesting… Regards, Allen
Page 1 of 6